Advanced View Pic Microcontroller Projects List
List of Projects using Pic Microcontroller with advance view:
-
Countdown Timer using PIC16F690 microcontroller
This is a simple countdown-timer-on-a-chip project - you program the PIC, attach some buttons and a pair of 2-segment LEDs, and you are done. I used this timer for one of my projects, but I tried to make that timer as generic as possible, so…... Listed under:
Clocks & Timers
-
Music player built on microcontroller AT91SAM7S256 with ARM core
1. The player allows: playback wav files in stereo format, 22,500Hz freqfency, and 8 bits of resolution, display the song titles, display time of songs, the possibility of stopping (pause) and switch songs, the possibility of change volume (+, -), read data from the MMC…... Listed under:
Audio, Sound & Radio
-
PIC16F84 Evaluation Board
Introduction When I set, some time ago, about working with a PIC 16x84, I had immediately to face the problem to have a permanently and stably working circuit, without mounting the PIC on a prototype board every time. Searching on the net, I didn't find…... Listed under:
Development Boards & Kits
-
Microcontroller Controlled Metal Detector Projects
Result of displays in the form of two scales, which are estimated to judge the material goal.In addition, the screen is small scale level of response and the current supply voltage. PIC18F252 The program is intended for controller PIC18F252.The controller PIC16F873 (A) to this version…... Listed under:
LCD & Display Projects
-
Q-matic Circuit Application of PIC16F877 Microcontroller
In this article I used in banks and hospitals will give information about the Q-matic s. I’ve done a routing circuit board (main board) and consists of three separate teller. Routing PIC16F877 on board, if the teller did not use pic16f876 in each. Teller as…... Listed under:
LED Projects
-
PIC18F2550 : Blink LED using XC8 Compiler
Welcome to another chapter of PIC18F programming Tutorial. In this chapter we are going to program a simple 28 pin PIC18F2550 microcontroller using mplabx IDE and XC8 Compiler. The concepts for programming a pic18f2550 microcontroller is still going to be almost same as previous tutorials…... Listed under:
LED Projects
-
RC Servo Switcher using pic microcontoller
Introduction Some fellow members of The Abbenay Hackspace (an open hacker space based in Stockholm, Sweden) are embarked on an ambitious project with the aim of being the first to build an autonomous sailing robot which is capable of circumnavigating the Earth. The project is…... Listed under:
Motors & Robotics
-
USB Interface Board Tutorial Using PIC18F4550
USB Interface Development Board Tutorial -1 STAGE/PART-1 MAKING OF THE MAIN CIRCUIT BOARD CONTROL YOUR DEVICES FROM COMPUTER USING USB PORT – pic18f4550 + MPLAB IDE INTRODUCTION ( USB PROJECT) : STEP 1 This project demonstrates a computer control interface using a USB Board. (USB…... Listed under:
Communication & Interfacing
-
Stepper Motor Speed Control with PIC18F4550
Stepper Motor Drivers USB Stepper Motor Driver Stepper Motor Driver PIC18F4550 --Stepper Motor schematics Stepper Motor Speed Controller Stepper Motor driver PIC18F2550 IR Interterface to Stepper Motor Stepper Motor Speed controller using PIC18F4550 This tutorial is all about tuning the speed of a stepper motor…... Listed under:
Motors & Robotics
-
A DDS Module based on the AD9835 using PIC16F84
Table of contents Purpose Disclaimer Schematics PCB Pictures of the finished module Notes & comments SSTV Testgenerator Credits Purpose While working on a project I came across the DDS chips from Analog Devices. Especially the AD9835was very atractive to me because of its super simple…... Listed under:
Meters & Test Instruments
-
PIC16F84A Gas Detector using GH-312 sensor
Introduction This is a gas detecting circuit capable of sensing many different types of gases. The sensor used is the GH-312 and from the datasheet it is capable of sensing gases like smoke, liquefied gas, butane and propane, Methane, alcohol,hydrogen, etc. Schematic Parts List R1 …... Listed under:
Sensors & Temperature
-
Stepper Motor Driver using PIC18F4550 Microcontroller
Stepper Motor Tutorial In this tutorial we are going to drive a Single unipolar stepper motor using PIC18F4550 Microcontroller in various different stepping modes. The source code and Project files are free to download at the end of this page. - Stepper motor due its…... Listed under:
Motors & Robotics
-
Serial Data Logger with PIC microcontroller
The data logger consists of a simple op-amp amplifier circuit that amplifies the signal and sends it to be digitized by a PIC16F688 microcontroller, serialized, and sent to the computer's serial port via a MAX232 serial driver: I guess you are already wondering about some…... Listed under:
Communication & Interfacing
-
8 Channel IR Remote Control
This IR remote control that you can use to control other devices or circuits up to 8 devices. The control codes are sent in RC5 format modulated to about 38 kHz carrier frequency.The IR transmitter powered by the CR2016 which is a 3V button Cells…... Listed under:
Home Automation & Security
-
Discolight effect with bass beat control using PIC16F84A
Short description of the operation: External circuit converts bass beat of music into pulses. The motor is controlled by them. If theres bass beat recognised then the motor rotates one direction (in full stepping) for a predefined time then stops. If the second beat comes…... Listed under:
LED Projects
-
PIC18F2550 Project Board using pic microcontroller
The new PIC18F2550 Project Board was designed as the development platform for student projects. The board features MCU: PIC18F2550 with external xtal, ADC: one channel 0-2.5V sigma-delta converter, Linear Technology LTC2400/LTC2420, 6-channal 10-bit ADC 0-5V, Display: Two connectors for text LCD or GLCD, USB: onchip…... Listed under:
Development Boards & Kits
-
LED Persistence of Vision Display
Electrical The main components of the electrical system were the timing system and the LED control system for 40 LEDs using a single PIC. A schematic of the system is shown below (click for larger view): timing In order to time the display properly to…... Listed under:
LED Projects
-
Connect I²C with PIC
The I²C full master MSSP module is available with a number of PIC MCU models. mikroC PRO for PIC provides library which supports the master I²C mode. Important : Some MCUs have multiple I²C modules. In order to use the desired I²C library routine,…... Listed under:
Communication & Interfacing
-
Digital DCF77 clock with LCD and gong using PIC16F628A
Always the right time and date with DCF77 This project make use of a PIC16F628(A) and a DCF77 receiver from Conrad (Orderno. 64 11 38) Optional there is a possibility to connect an electronic gong on it. Click for information about DCF77 on the link underneath: The working…... Listed under:
Clocks & Timers
-
Connect Memory Card using PIC18F4520 Code
The Multi Media Card (MMC) is a Flash memory card standard. MMC cards are currently available in sizes up to and including 32 GB and are used in cellular phones, digital audio players, digital cameras and PDA’s. mikroC PRO for PIC provides a library for…... Listed under:
Communication & Interfacing
-
Connect USB HID with PIC18F4450 Code
Universal Serial Bus (USB) provides a serial bus standard for connecting a wide variety of devices, including computers, cell phones, game consoles, PDA’s, etc. USB Library contains HID routines that support HID class devices, and also the generic routines that can be used with vendor…... Listed under:
Communication & Interfacing
-
TechBot line following robot using PIC16F84
Design Goal: The TechBot1 is a small line following robot designed for for the 1998 Embedded Systems conference in San Jose California. It was built by Jerry Merrill and myself and was designed as a promotional robot that would follow a black line drawn on…... Listed under:
Motors & Robotics
-
UART Communication using PIC Code
The UART hardware module is available with a number of PIC compliant MCUs. The mikroC PRO for PIC UART Library provides comfortable work with the Asynchronous (full duplex) mode. You can easily communicate with other devices via RS-232 protocol (for example with PC, see the…... Listed under:
Communication & Interfacing
-
Connect Ethernet controller with PIC Code
The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI. The ENC28J60 meets all of the IEEE 802.3 specifications. It incorporates a number of…... Listed under:
Communication & Interfacing
-
Create Musical Tone using PIC Code
The mikroC PRO for PIC provides a Sound Library to supply users with routines necessary for sound signalization in their applications. Sound generation needs additional hardware, such as piezo-speaker (example of piezo-speaker interface is given on the schematic at the bottom of this page). Library…... Listed under:
Audio, Sound & Radio
-
Extend I/O Ports using PIC Microcontroller
The mikroC PRO for PIC provides a library for communication with the Microchip’s Port Expander MCP23S17 via SPI interface. Connections of the PIC compliant MCU and MCP23S17 is given on the schematic at the bottom of this page. Important : The library uses the…... Listed under:
Communication & Interfacing
-
Thermometer with PIC Microcontroller
In the last tutorial we learn about the multiplexing technique used with seven segment displays. We learnt how it saves i/o line by using persistence of vision. Only one digit is lit at a time, but to a human eye it is too fast to…... Listed under:
Meters & Test Instruments
-
Multiple Servomotors
Using a modified version of the last program, we can control as many servomotors as we have I/O lines on port B. In the next listing, we will control two servos in the same manner as we controlled a single servo in the previous program.…... Listed under:
Motors & Robotics
-
Rotary Encoders
Rotary encoders are very versatile input devices for microcontroller projects. They are like potentiometers expect of digital nature and unlike analogue potentiometers they never wear down. Rotary encoders not only provide 360 degrees of rotational freedom they also allow digital positioning information to be gained…... Listed under:
Motors & Robotics
-
Relay Timer with PIC16F628
Here is 0 to 99 minutes relay timer using PIC16F628 microcontroller and 16 character LCD display. The microcontroller is PIC16F628A running at 4.0 MHz clock using an external crystal. An HD44780 based 16×2 character LCD is the main display unit of the project where you…... Listed under:
Clocks & Timers
-
Night Light Saver V3.2 (PIC12C508)
Introduction It's time for 8-pin microcontroller Microchip PIC12C508, the SAVER V3.2, my latest design of a device that turns a night light on and off everyday. The circuit uses only a PIC12C508 8-pin CMOS micontroller and a small triac, MAC97A6. The Saver V3.2 also demonstrates…... Listed under:
LED Projects