LED CUBE CIRCUIT 5X5X5 PIC16F688




Led cube pic16f688 microcontroller used in the output driver circuit in the CA4016 LED (adjustable driver 16 channel flow ) is being integrated over. Prepared with PIC16F688 assembly source software. Asm, pcb printed circuit... Electronics Projects, Led Cube Circuit 5x5x5 pic16f688 “led projects, microchip projects, microcontroller projects, “

LED CUBE CIRCUIT
Led cube pic16f688 microcontroller used in the output driver circuit in the CA4016 LED (adjustable driver16 channel flow ) is being integrated over. Prepared with PIC16F688 assembly source software. Asm, pcb printed circuit diagram hex codes list of materials have everything complete project

LED cube is made up from 125 LEDs arranged into 5 layers of 25 LEDs each. The display itself is multiplexed so instead of requiring 125 connections it requires one to each of the five layers and 25 to each LED in a layer making a total of 30. The cube is refreshed by a software interrupt routine with each layer active for 2ms, so the entire cube is refreshed every 10mS (100Hz). This results in a display with no visible flicker. LED cubes, small 3x3x3 cubes, bi-colour, RGB and mono cubes, amazing 16 x 16 x 16 RGB cubes. However, very few show you how to make one and provide the firmware. 5x5x5 LED cube project shown here is a great size if you want to have ago at building a LED cube. Why? because it gives a good balance between the number of LEDs and therefore cost and time needed to assemble it and the overall 3-D effect. 8x8x8 or even 10x10x10 cubes look good and it doesn’t sound much more work than a 5x5x5 cube but you’re going from 125 LEDs to 512 or 1,000 LEDs in a 10x10x10 cube – that’s alot of work.

READ  Low Cost Solar Lighting Controller

LED CUBE CIRCUIT(1)

Source: LED CUBE CIRCUIT 5X5X5 PIC16F688 alternative led-cube-circuit-5x5x5-pic16f688.rar alternative link3




Leave a Comment

*
= 5 + 6

Read previous post:
TIBBO – MQTT LIBRARY DEMO
TIBBO – MQTT LIBRARY DEMO

Tibbo created two small programs that illustrate how easy it is to write MQTT-enabled apps in Tibbo BASIC or Tibbo...

Close
Scroll to top