gps

U BLOXS F9 MULTI BAND GNSS MODULE WITH RTK DELIVERS CENTIMETER LEVEL ACCURACY IN SECONDS

U-BLOX’S F9 MULTI-BAND GNSS MODULE WITH RTK DELIVERS CENTIMETER-LEVEL ACCURACY IN SECONDS

A little while ago, we covered a positioning receiver IC that enhanced positioning accuracy to centimeters due mostly to its cutting-edge capability of concurrent reception of multiple constellation data (GPS, GLONASS, BeiDou, and QZSSl, to be precise). Its name is the Teseo-LIV3F, from ST Microelectronics, and you can check the article link below, which I recommend […]

U-BLOX’S F9 MULTI-BAND GNSS MODULE WITH RTK DELIVERS CENTIMETER-LEVEL ACCURACY IN SECONDS Read More »

FEATHERS2 – ESP32 S2 BASED DEVELOPMENT BOARD IN ADAFRUIT FEATHER FORM FACTOR

FEATHERS2 – ESP32-S2 BASED DEVELOPMENT BOARD IN ADAFRUIT FEATHER FORM FACTOR

So far, there have been quite a number of development boards following Adafruit Feather format with products, like the QuickFeather Cortex-M4 + FPGA board and nRF9160 Feather providing LTE IoT & GPS connectivity. Added to the list now is the new FeatherS2 that is based on Espressif’s ESP32-S2 microcontroller SoC. As a quick reminder, the ESP32-S2 unlike other ESP processors by Espressif Systems, is the first of its kind to include

FEATHERS2 – ESP32-S2 BASED DEVELOPMENT BOARD IN ADAFRUIT FEATHER FORM FACTOR Read More »

R C Controlled Switch for Drones

R/C Controlled Switch for Drones

Although there are MANY good circuits available on the internet for similar projects, I had a dedicated problem to solve. Most of the circuits available switches their outputs on at mid stick position (50%). My drones all use six channels (Throttle, Aileron, Rudder, Elevator, GPS Mode, Flight Mode), thus not leaving any spare channel to

R/C Controlled Switch for Drones Read More »

ROHDE SCHWARZ RELEASES NEW SIGNAL GENERATOR

ROHDE & SCHWARZ RELEASES NEW SIGNAL GENERATOR

Rohde & Schwarz (R&S) released the SMCV100B, a signal generator that covers 5G NR extended FR1 frequency range up to 7.126 GHz. It leverages the R&S WinIQSIM2 simulation software, which supports common cellular and wireless connectivity standard. This includes standards for IoT and Wi-Fi. Working within the automotive industry, the R&S SMCV100B is suitable for end-of-line testing of radios

ROHDE & SCHWARZ RELEASES NEW SIGNAL GENERATOR Read More »

GNSS MODULES ELARA AND ERINOME

GNSS MODULES: ELARA AND ERINOME

WĂŒrth Elektronik’s GNSS modules are available in UART and IÂČC interfaces WĂŒrth Elektronik’s GNSS modules, Elara and Erinome series, are suitable for different application areas, such as tracking and navigation devices, container localization, fleet management or autonomous agricultural machines. Elara Modules: The Elara-I module is a compact GNSS module with an integrated antenna for operation in location-based applications, products,

GNSS MODULES: ELARA AND ERINOME Read More »

SBG SYSTEMS ELLIPSE D MINIATURE DUAL GPS INS

SBG SYSTEMS ELLIPSE-D MINIATURE DUAL GPS INS

Ellipse-D is the smallest Inertial Navigation System (INS) integrating a Dual-antenna, multi-band GNSS receiver, capable of delivering precise heading as well as centimeter-level position accuracy in the most challenging GNSS conditions. It provides attitude, heading, heave as well as navigation outputs. Ellipse-D is an ideal choice for magnetic denied applications and can operate in all dynamic

SBG SYSTEMS ELLIPSE-D MINIATURE DUAL GPS INS Read More »

NORDIC THINGY 91 CELLULAR IOT PROTOTYPING KIT 1

NORDIC THINGY:91 CELLULAR IOT PROTOTYPING KIT

Nordic Semiconductor’s multi-sensor kit supports LTE-M, NB-IoT, GPS, and Bluetooth low energy Nordic Semiconductor’s Nordic Thingy:91 multi-sensor prototyping kit is ideal for cellular IoT projects using the nRF9160 system-in-package (SiP). The kit is equipped with a diverse collection of sensors and interfaces that make it highly adaptable to rapid prototyping and getting a user’s proof-of-concept off the ground quickly.

NORDIC THINGY:91 CELLULAR IOT PROTOTYPING KIT Read More »