The Multi Media Card (MMC) is a Flash memory card standard. MMC cards are currently available in sizes up to and including 32 GB and are used in cellular phones, digital audio players, digital cameras and PDA’s. mikroC PRO for PIC provides a library for accessing data on Multi Media Card via SPI communication. This […]
Universal Serial Bus (USB) provides a serial bus standard for connecting a wide variety of devices, including computers, cell phones, game consoles, PDA’s, etc. USB Library contains HID routines that support HID class devices, and also the generic routines that can be used with vendor specified drivers. USB HID Class The HID class consists primarily […]
This project is designed to develop as a robotic vehicle that can be controlled by a cell phones. DTMF commands from a phone send to another cell phone which is mounted on the robotic vehicle. These commands are fed to a PIC microcontroller of 8-bit architecture to operate the vehicle movement through motor interface. Conventionally […]
Design Goal: The TechBot1 is a small line following robot designed for for the 1998 Embedded Systems conference in San Jose California. It was built by Jerry Merrill and myself and was designed as a promotional robot that would follow a black line drawn on a dry erase board. Motive Power: The TechBot1 uses […]
The UART hardware module is available with a number of PIC compliant MCUs. The mikroC PRO for PIC UART Library provides comfortable work with the Asynchronous (full duplex) mode. You can easily communicate with other devices via RS-232 protocol (for example with PC, see the figure at the end of the topic – RS-232 HW […]
The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI. The ENC28J60 meets all of the IEEE 802.3 specifications. It incorporates a number of packet filtering schemes to limit incoming packets. It also provides […]
The mikroC PRO for PIC provides a Sound Library to supply users with routines necessary for sound signalization in their applications. Sound generation needs additional hardware, such as piezo-speaker (example of piezo-speaker interface is given on the schematic at the bottom of this page). Library Routines Sound_Init Sound_Play Sound_Init Prototype void Sound_Init(char *snd_port, char snd_pin); […]
It has been a quiet period but a very busy period, very active and very fruitful. I will be launching the projectryu.com site soon with tons of free resources for the audio hobbyist. Getting back to the title of this post, i would like to present a few improvements and a concrete design as a […]
The mikroC PRO for PIC provides a library for communication with the Microchip’s Port Expander MCP23S17 via SPI interface. Connections of the PIC compliant MCU and MCP23S17 is given on the schematic at the bottom of this page. Important : The library uses the SPI module for communication. User must initialize the appropriate SPI […]
In the last tutorial we learn about the multiplexing technique used with seven segment displays. We learnt how it saves i/o line by using persistence of vision. Only one digit is lit at a time, but to a human eye it is too fast to catch, so we see all four digit lit the same […]
Your one-stop destination for PIC microcontroller projects, tutorials, PDFs, software, tools and everything embedded. Built for students, hobbyists & engineers.
PIC Microcontroller has been helping students and engineers since 2008 by providing high quality PIC projects and resources. We are passionate about embedded systems and microcontroller development.
© 2008 – 2026 PIC Microcontroller. All Rights Reserved.