Allegro’s A31315 robust, fully integrated 3DMAG™ Hall effect magnetic position sensors are designed to support a wide range of non-contact rotary and linear position measurements in automotive, industrial, and consumer applications. This family of sensors integrates vertical and planar Hall effect elements to detect two out of three magnetic field components (X, Y, and Z). Using configurable […]
A31315 3D MAGNETIC POSITION SENSORS Read More »
Texas Instruments TPS25750 USB Type-C & Power Delivery (PD) Controller is optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The Texas Instruments TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web-based graphical user
TPS25750 – HIGHLY INTEGRATED USB TYPE-C® AND USB PD CONTROLLER WITH PRE-CONFIGURED GUI Read More »
Texas Instruments TMAG5123 High-Voltage Hall-Effect Switch is a chopper-stabilized omnipolar, active-low, in-plane, Hall-effect switch sensor. The TMAG5123 eases mechanical placement of the sensor by measuring magnetic fields parallel to the surface of the printed circuit board (PCB) in a surface mount SOT-23 package. Different sensitivity levels are available to match the specific requirement of the application. When
TEXAS INSTRUMENTS TMAG5123 HIGH-VOLTAGE HALL-EFFECT SWITCH Read More »
Easy-to-use general purpose power supply units ideal for various bench applications requiring stand-alone or system use. Farnell, an Avnet Company and global distributor of electronic components, products and solutions, is further expanding its market-leading test and measurement range with the introduction of the new NGA100 power supply series, part of the Essentials Portfolio, from Rohde &
NEW ROHDE & SCHWARZ NGA100 POWER SUPPLY SERIES, STOCKED BY FARNELL Read More »
This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface also supports direct control mode and is designed to operate with 3.3/5V CMOS compatible levels. The
GALVANIC ISOLATED 8 CHANNEL HIGH-SIDE SWITCH (0.6A PER CHANNEL) Read More »
Texas Instruments TMAG511x 2-Dimensional Dual Hall-Effect Latches operate from a 2.5V to 38V power supply. Designed for high-speed and high-temperature motor applications, these devices are optimized for applications leveraging rotating magnets. Integrating two sensors and two separate signal chains, the TMAG511x offers two independent digital outputs, giving speed and direction calculation (TMAG5111) or giving directly the digital output of each independent latches
TEXAS INSTRUMENTS TMAG511X 2-DIMENSIONAL DUAL HALL-EFFECT LATCHES Read More »
A group of researchers from the Ulsan National Institute of Science and Technology (UNIST), South Korea, have designed a really tiny and ultra-dense Micro-supercapacitor that can be printed directly into circuits. Microsupercapacitors (MSCs) have garnered considerable attention as a promising power source for microelectronics and miniaturized portable/wearable devices. However, their practical application has been hindered by the manufacturing
TINY MICROSUPERCAPACITOR THAT COULD POWER FUTURE WEARABLES Read More »
The 18650 LiPo battery manager comes with a fuel gauge and a dual-rail power supply. The dual-rail power provides a 5V rail along with a 3.3V rail dedicated to powering the microcontroller and the display ports of the system. It is termed as an “all-in-one single-cell LiPo battery manager” by Manuel Alfonso for its flexible compatibility with all types
18650 LIPO BATTERY MANAGER FOR REMOTE APPLICATIONS Read More »
Texas Instruments’ converter offers 1% output accuracy in 1.5 mm x 1.5 mm QFN package Texas Instruments’ TLV62595 is a high-frequency synchronous step-down converter that is optimized for a compact solution size and high efficiency. The device integrates switches that can deliver an output current up to 4 A. At medium to heavy loads, the converter operates
TLV62595 2.5 V TO 5.5 V INPUT 4 A STEP-DOWN CONVERTER Read More »
The INA190-Q1 is an automotive, low-power, voltage-output, current-shunt monitor (also called a current-sense amplifier). This device is commonly used for monitoring systems directly connected to an automotive 12-V battery. The INA190-Q1 can sense drops across shunts at common-mode voltages from –0.2 V to +40 V, independent of the supply voltage. In addition, the input pins have an absolute maximum
INA190-Q1, 40V, BI-DIRECTIONAL, ULTRA-PRECISE CURRENT SENSE AMPLIFIER Read More »
