Projects   /   Sensors & Temperature

Voltage, Temperature & Frequency Meter With PIC Micro controller

Features… Voltage, Temperature and Frequency can switching to each others using push buttons. Voltage Meter can measure DC voltage between 0v to 50v.

Published

At a glance

CategorySensors & Temperature
IncludesCircuit diagram
Reading time~3 min

Summary of Voltage, Temperature & Frequency Meter With PIC Micro controller

Summary: This project implements a PIC-microcontroller-based meter that switches between voltage, temperature, and frequency measurements via push buttons. It measures DC voltage up to 50 V (via a divider and zener protection), temperature from 0°C to 1500°C using an LM35 sensor, and frequency up to 65 kHz using PIC Timer1. Each function can be paused with a button, and transistor input protection is used for frequency inputs. Calibration adjustments are available for improved accuracy.

Parts used in the Voltage, Temperature & Frequency Meter With PIC Micro controller:

  • PIC microcontroller (with ADC and Timer1)
  • LM35 temperature sensor
  • Voltage divider resistors (10K and 1.1K)
  • 5V zener diode
  • Transistor for input protection
  • Resistor for transistor base (4.7K)
  • Push buttons for switching functions and pause
  • Power supply (5V for PIC, up to 12V for input signal testing)

Features…

  • Voltage, Temperature and Frequency can switching to each others using push buttons.
  • Voltage Meter can measure DC voltage between 0v to 50v.
  • Frequency Meter can measure frequency up to 65KHz.
  • Temperature Meter can use between 00C to 1500C.
  • Every functions can paused using push button.

Voltage, Temperature & Frequency Meter With PIC Micro controller

Instructions…

Voltage meter – 

Volt meter can measure dc voltages up to 50v. 5V is the maximum voltage can handle PIC microcontroller, as it is voltage divider (10K,1.1K) use for convert 50V to 5V . 5v zener diode use for safety of PIC microcontroller analog input pin.

Temperature meter – 

Temperature meter can use between 00C to 1500C. But LM35 sensor can use between -550C to 1500C. Sensor’s resistant is changing opposite to temperature, as it is maximum temperature gives maximum voltage output(5v)  and minimum temperature gives minimum voltage output(0v).  

Frequency meter – 

Theoretically, frequency meter can use up to 65KHz, that is because this circuit made by using Timer 1(16bit) of PIC microcontroller.

Voltage, Temperature & Frequency Meter With PIC Micro controller schematicTimer 0 can only measure up to 256Hz, that is because timer 0 is 8 bit timer. Transistor part is use for safety of microcontroller from amplitude of wave signal. This circuit can apply 12v amplitude or more changing transistor base resistor value(4.7K). I tested it, using 12v amplitude square wave signal. 

Troubleshooting…

If you have problem about accuracy of voltmeter, temperature meter and frequency meter, you can change values (*1,*2,*3)

 

For more detail: Voltage, Temperature & Frequency Meter With PIC Micro controller

  • What voltage range can the voltmeter measure?
    The voltmeter can measure DC voltages up to 50V using a voltage divider that converts to 5V for the PIC.
  • How is the PIC microcontroller protected from high input voltage?
    A 5V zener diode and a voltage divider (10K and 1.1K) are used to protect the PIC analog input.
  • What temperature range does the temperature meter support?
    The temperature meter is described as usable between 0°C to 1500°C, and the LM35 sensor range noted is -55°C to 1500°C.
  • How does the temperature sensor output relate to temperature?
    The sensor output voltage increases with temperature, giving maximum voltage at maximum temperature and minimum voltage at minimum temperature.
  • What is the maximum measurable frequency?
    The frequency meter can measure up to 65 kHz using Timer1 (16-bit) of the PIC microcontroller.
  • Why can't Timer0 be used for high frequency measurement?
    Timer0 is an 8-bit timer and can only measure up to 256 Hz, so it is unsuitable for high-frequency measurement.
  • How is the microcontroller protected from high-amplitude frequency signals?
    A transistor stage is used to protect the microcontroller from the amplitude of the input wave signal.
  • Can the circuit handle 12V amplitude signals?
    Yes; the circuit can handle 12V amplitude square waves by appropriately choosing the transistor base resistor value (4.7K was used in testing).
  • Can each function be paused?
    Yes, every function can be paused using a push button.
  • What can be adjusted if accuracy is poor?
    If accuracy problems occur with the voltmeter, temperature meter, or frequency meter, you can change specified component values marked in the document (*1, *2, *3).
Sensors & Temperature

Spectrum Analyzer using TMS320F28023DA with Proteus Simulation

Introduction This project demonstrates a real-time audio spectrum analyzer using the TMS320F28023DA Piccolo microcontroller, simulated in Proteus VSM. The system captures an...

Sensors & Temperature

DHT22 Low Cost Humidity Sensor using PIC18F25K20 with Proteus Simulation

IntroductionThis microcontroller project demonstrates how to interface a DHT22 (RHT03) digital temperature and humidity sensor with a PIC18F25K20 using Proteus simulation.The project...

Sensors & Temperature

Crafting a Microcontroller-Based Temperature Monitoring System

Abstract As technological advancements progress, processes become increasingly intricate, demanding a corresponding expansion in the parameters necessary for efficient analysis. Data acquisition,...

Sensors & Temperature

Automated Room Temperature Monitoring System using Microcontrollers

Abstract Monitoring the temperature within a computer server room stands as a crucial responsibility to uphold the server's performance amidst potential disruptions...

Sensors & Temperature

Innovative Approaches to Control System Design for 100KV Impulse Generators

1. INTRODUCTION An impulse generator is an electrical device designed to generate short-duration surges of high voltage or high current. Impulse signals...

Sensors & Temperature

Smart Baby Incubator: Enhancing Care with PIC Microcontrollers

INTRODUCTION Within the effective Baby Incubator system, the incubator serves as an infant-stimulation apparatus designed for the intensive care of newborns, particularly...

Ibrar Ayyub

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough...