Summary of LCD Module Control over IR Link using PIC16F690
This project implements LCD control over an IR link using PIC16F690 microcontrollers, HSDL-1100 IR transceivers, and a KS070B LCD. It demonstrates serial communication between two PICs with a 16-bit packet protocol supporting up to 32 device addresses and basic error detection via two inverse parity bits. Packets distinguish command versus data bytes and are transmitted as sequences of short IR pulses to drive the LCD remotely.Parts used in the LCD Module Control over IR Link using PIC16F690:
- PIC16F690 microcontrollers (two units)
- HSDL-1100 IR transceivers
- KS070B LCD display module
- Power supply (suitable for PIC and LCD)
- Supporting passive components (resistors, capacitors)
- Wiring and connectors
- Optional prototyping board or PCB
Serial protocol supports addressing of up to 32 devices over shared media (IR or direct connection) and have basic error detection (2 inverse parity bits). Packets consist of 16 bits, as given below:
- P0 - inverse parity of all even numbered bits [2-14]
- P1 - inverse parity of all odd numbered bits [3-15]
- Device ID - ID of the target device; LCD responds to ID 00001
- C/D - Code or Data; if "1", following byte contains command (for example, LCD "CLEAR SCREEN" command); if "0", following byte contains data (in case of the LCD this would be code of a character to be displayed).
Data is encoded as a sequence of short pulses. The beginning of a data packet is shown below:
For more detail: LCD Module Control over IR Link using PIC16F690
Quick Solutions to Questions related to LCD Module Control over IR Link using PIC16F690:
- What microcontroller is used in the project?
Two PIC16F690 microcontrollers are used for serial communication and control. - Which IR transceivers are used for the link?
HSDL-1100 IR transceivers are used for the IR link. - Which LCD module is controlled in this project?
The KS070B LCD display module is used. - How many devices can the serial protocol address?
The serial protocol supports addressing up to 32 devices over the shared media. - What is the packet size in the protocol?
Packets consist of 16 bits. - How does the protocol provide error detection?
Error detection is provided by two inverse parity bits, P0 and P1. - What do the C/D bits indicate?
The C/D bit indicates whether the following byte is a command (1) or data (0) for the LCD. - What device ID does the LCD respond to?
The LCD responds to device ID 00001.
Related projects
Air Sampler using PIC16F690 microcontroller
Do you ever wonder what is in the air you breathe? Or maybe you have hay fever and want to know what...
LED Projects · PIC16F6908×8 LED matrix using PIC16F690 microcontroller
8x8 LED matrix This instructable will show you how to make a 8x8 LED matrix in witch you can control evry single...
Communication & Interfacing · PIC16F6903x3x3 LED Cube using PIC16F690 microcontroller
3x3x3 LED Cube Here is my 3x3x3 LED Cube project. It runs using a PIC16F690. Along with the brief explanation of how...
LCD & Display ProjectsLeveraging Blockout Banners for Effective Electronics and Tech Product Displays
Blockout banners have become a popular and effective tool for displaying electronics and tech products in various settings, from trade shows and...
LCD & Display Projects · PIC18F4520Interfacing PIC18F4520 microcontroller with an HD44780 LCD
Introduction Being able to display data from a microcontroller visually has many advantages. It allows for menus, status indicators, and instructions to...
LCD & Display ProjectsVideo Project Development in the Midst of an Impromptu Online Semester
Receiving robot parts in the mail was an unexpected conclusion to the Winter 2020 semester for students. However, when faced with a...
