transformer

Pure Sinewave Inverter Using Pic16f72 Without Center Tap Transformer and Without HV Transformer

Pure Sinewave Inverter Using Pic16f72 Without Center Tap Transformer and Without HV Transformer

finally the most reliable and awaited pure sine wave inverter,it’s here for all members.(don’t hesitate to contact me @ [email protected]. features: INVERTER O/P VOLT : 230V (+2%)INV. O/P FREQ : 50Hz INV. O/P WAVEFORM : SINE WAVE HARMONIC DISTORTION : <3% CREST FACTOR : >4:1 INV.EFFICIENCY : 90% for 24V system : >85% for 12V […]

Pure Sinewave Inverter Using Pic16f72 Without Center Tap Transformer and Without HV Transformer Read More »

PIC12F629 PWM SMPS CONTROL

PIC12F629 PWM SMPS CONTROL

PIC12F629 microcontroller is done with PWM Control GP0, GP1 output MOSFETs with BUK555 in the SMPS transformer EI33 if sülü. 25kHz operating frequency of the circuit tests made ​​with 50w load. ATX SMPS power supply transformer ei33 from the… Electronics Projects, PIC12F629 PWM SMPS Control “microchip projects, microcontroller projects, pic assembly example, smps circuits, smps projects, smps schematic,

PIC12F629 PWM SMPS CONTROL Read More »

TI’S EMI OPTIMIZED INTEGRATED TRANSFORMER TECHNOLOGY MINIATURIZES ISOLATED POWER TRANSFER INTO IC SIZED PACKAGING

TI’S EMI-OPTIMIZED INTEGRATED TRANSFORMER TECHNOLOGY MINIATURIZES ISOLATED POWER TRANSFER INTO IC-SIZED PACKAGING

Engineers can shrink their power solution by as much as 80% and maximize efficiency in high-voltage industrial applications with a new high-density, isolated DC/DC bias power supply. Texas Instruments (TI) introduced the first integrated circuit (IC) developed with a new proprietary integrated transformer technology: a 500-mW high-efficiency isolated DC/DC converter with the industry’s lowest electromagnetic interference (EMI), the UCC12050.

TI’S EMI-OPTIMIZED INTEGRATED TRANSFORMER TECHNOLOGY MINIATURIZES ISOLATED POWER TRANSFER INTO IC-SIZED PACKAGING Read More »

Linear applies switched capacitor step down topology for inductor less

Linear applies switched-capacitor step-down topology for inductor-less DC/DC

LTC7820 is, a high power fixed ratio charge pump DC/DC controller that eliminates the power inductor in a non-isolated intermediate bus converter, allowing up to a 50% reduction in circuit size and up to 4000 W/in³ power density. The 72V fixed-ratio DC/DC controller can deliver 500W. Non-isolated regulators and voltage level converters that employ energy

Linear applies switched-capacitor step-down topology for inductor-less DC/DC Read More »

Driver eases high speed ADC inputs1

Driver eases high-speed ADC inputs

Description The MAX9626/MAX9627/MAX9628 are low-noise, low-distortion, and high-bandwidth differential amplifier/ADC drivers for use in applications from DC to 1.35GHz. The exceptional low input-referred noise and low distortion make these parts an excellent solution to drive high-speed 12-bit to 16-bit pipeline ADCs. The output common mode is set through the VOCM input pin, thus eliminating the

Driver eases high-speed ADC inputs Read More »