About: Ibrar Ayyub

Hi EveryBody i am Again Doing something. and it is with PIC’s! Almost Everybody do not want a Big Arduino in their projects or to control a rgb led with Arduino uno? Enjoy Compressing your projects with PIC and Attiny too. but in this wwe will be making a PIC Programmer To Program 12f675 PIC. […]

This project is car hands free that retransmits the audio signal from a cell phone to the FM broadcast band. By placing the cell phone’s speaker near the microphone, the user can use the phone as a hands-free device while driving. Specifications   – Power supply: +2.7V to +5.5V stab – 2.1mA – RF power: […]

Very small power supply unit in the size of a cigarette box. The input voltage is 24V. Its supplied by a external switch mode AC/DC PSU. The output voltage range is 0V to 24V at 0A to 3A. A switch mode preregulator reduces the power loss. This allows a very compact design. Voltage and current […]

With adjustable tone control, USB power and loudspeaker output By Elektor Labs India Here is an all-analog, all-through-hole, cheap & cheerful preamplifier for that perennial problem of getting the microphone amplification just right, which is a challenge not only with the faithful reproduction of lead vocals during concerts and recordings, but also with campfire and […]

This is a development board for Attiny84 microcontroller. Tha Attiny84 chip has 11 pins addressable with the Arduino IDE, 8k of flash memory for program storage, and 512 bytes of RAM available for the stack and program variables. One feature of the Attiny84 that is very nice for assembly language programmers is unlimited access to […]

Measuring muscle activation via electric potential, referred to as electromyography (EMG) , has traditionally been used for medical research and diagnosis of neuromuscular disorders. However, with the advent of ever shrinking yet more powerful microcontrollers and integrated circuits, EMG circuits and sensors have found their way into prosthetics, robotics and other control systems. Yet, EMG […]

Hello everyone, The important aspect of every learning is to induce curiosity and doing something meaningful to satisfy that.With the help of that curiosity, I’m here making a volume adjuster program which resembles the same in most devices but not that much, Here the default volume will be 10.Maximum volume will be 20 as well […]

I’m finishing up my computer table i’ve been working on and one of the final touches is making LEDs sync to the speakers.  I have some pics of my computer too.  This project took me about 15 minutes and was free because i had the parts laying around. Step 1: Materials  Items: -TIP31 transistor -4 […]

This is instructable for how to get started with PICAXE 08M microcontroller. To get started, you need: – 08M Protoboard or same kind of board (Can be homemade) – A LED – AXE027 USB Cable – 3V Power supply Step 1: Connect the led to pin 4 Just  connect cathode lead to Ground, and anode […]

In this instructable , I ‘ll show you how I built and tested this simple yet powerful circuit . The JDM Programmer is my favorite Microcontroller programmer. It is a simple circuit and compatible with many software loaders. I ‘ve built this circuit many years ago and learned Microcontroller programming using it and built many […]