amplifier

NEW ROHDE SCHWARZ SYSTEM AMPLIFIER TARGETS MICROWAVE DEVICE MANUFACTURERS

NEW ROHDE & SCHWARZ SYSTEM AMPLIFIER TARGETS MICROWAVE DEVICE MANUFACTURERS

As the market for mobile radio, IoT, satellite and radar applications grows, Rohde & Schwarz has introduced a new approach to the system amplifier challenges. With unprecedented output power, bandwidth and market-leading noise performance, the compact R&S®SAM100 offers users a unique proposition. Rohde & Schwarz, a global leader in microwave test & measurement systems, has […]

NEW ROHDE & SCHWARZ SYSTEM AMPLIFIER TARGETS MICROWAVE DEVICE MANUFACTURERS Read More »

BPW34 GAMMA RAY DETECTOR

BPW34 GAMMA RAY DETECTOR

The usual approach to radiation detection is the use of a Geiger-Müller tube and its high voltage circuit requirements, but during a quick surf through the internet today, I came across this portable and “accurate looking” solution developed by Stefan Wagner, on EasyEDA. Rather than the Geiger Muller tube and its complex circuitry, the project uses a miniature Silicon PIN

BPW34 GAMMA RAY DETECTOR Read More »

TDA7318 SURROUND SOUND SYSTEM TDA8567Q AMPLIFIER PIC16F628A CONTROL

TDA7318 SURROUND SOUND SYSTEM TDA8567Q AMPLIFIER PIC16F628A CONTROL

Normally only the hex code with source code projects that are not do not share, but this was an exception different project Surround Sound System, controlled, 2 Ă— 16 LCD display (hue, temperature, etc..) For me which is remarkable… Electronics Projects, TDA7318 Surround Sound System TDA8567Q Amplifier PIC16F628A Control “microchip projects, microcontroller projects, pic16f628 projects, Normally only the

TDA7318 SURROUND SOUND SYSTEM TDA8567Q AMPLIFIER PIC16F628A CONTROL Read More »

VACUUM TUBE PRE AMPLIFIER RUNS ENTIRELY ON 3.3V INCLUSIVE OF FILAMENT VOLTAGE

VACUUM TUBE PRE-AMPLIFIER RUNS ENTIRELY ON 3.3V, INCLUSIVE OF FILAMENT VOLTAGE

Most vacuum tubes need about 6.3V high supply plus filament voltage to operate. Running at 3.3V inclusively of the filament voltage, the new vacuum tube amplifier from Albert van Dalen has proven it possible to have one with the capacity to operate on an entirely low power supply voltage and still work well. To be able to

VACUUM TUBE PRE-AMPLIFIER RUNS ENTIRELY ON 3.3V, INCLUSIVE OF FILAMENT VOLTAGE Read More »

SINGLE ENDED 2 CHANNEL GAN CLASS D AMPLIFIER – EVALUATION BOARD

SINGLE-ENDED, 2-CHANNEL GAN CLASS D AMPLIFIER – EVALUATION BOARD

The EVAL_AUDAMP24 e-mode GaN HEMT-based evaluation board from Infineon Technologies is a 2-channel, 225W/ch (4Ω at ±43V) or 250 W/ch (8Ω at ±63V) half-bridge class D audio power amplifier for high-end Hi-Fi audio systems. This evaluation board demonstrates how to use the IGT40R070D1 E8220 CoolGaN™ gallium nitride transistor together with the MERUS™ IRS20957SPBF controller IC, implement protection circuits, and

SINGLE-ENDED, 2-CHANNEL GAN CLASS D AMPLIFIER – EVALUATION BOARD Read More »

AT89C51 L293D MOTOR CONTROL PROJECT

AT89C51 L293D MOTOR CONTROL PROJECT

AT89C51 L293D Motor Control Circuit Operation, Our project name and the name suggests, the treadmill is the motor control is required. When designing this project, I saw fit to use DC motors. Because the use of DC motors and… Electronics Projects, AT89C51 L293D Motor Control Project “avr project, microcontroller projects, AT89C51 L293D Motor Control Circuit Operation, Our

AT89C51 L293D MOTOR CONTROL PROJECT Read More »

ARROW ELECTRONICS INTRODUCES LOW COST RAPID PROTOTYPING DATA ACQUISITION PLATFORMS

ARROW ELECTRONICS INTRODUCES LOW-COST, RAPID PROTOTYPING DATA ACQUISITION PLATFORMS

Low-power, low-noise Analog Devices ICs and Intel MAX 10 FPGA in compact 86.5mm x 25mm outline Analog Devices and Arrow Electronics have worked with Trenz Electronic GmbH to produce three ready-to-use data-acquisition platforms that relieve design and manufacturing challenges for developers of professional measurement instruments. Benefits of the AnalogMAX-DAQ1 Platform: High-accuracy analog front-end: Ideal for

ARROW ELECTRONICS INTRODUCES LOW-COST, RAPID PROTOTYPING DATA ACQUISITION PLATFORMS Read More »

IPS 354 RADAR SENSOR – INNOSENT’S MID RANGE MOTION DETECTOR

IPS-354 RADAR SENSOR – INNOSENT’S MID-RANGE MOTION DETECTOR

InnoSenT’s IPS-354 operates in the 24 GHz ISM band and was developed for classic industrial radar applications, especially as a motion sensor for escalators. It is a K-band transceiver with two antennas; the split of the transmitting and receiving path enables maximum gain. For signal intensification, it also comes with an IF pre-amplifier. Its bandwidth is limited

IPS-354 RADAR SENSOR – INNOSENT’S MID-RANGE MOTION DETECTOR Read More »