Summary of SONY PHILIPS RC5 IR REMOTE DECODER CIRCUIT PIC16F84A
This article describes a PIC16F84A-based circuit that decodes Sony and Philips RC5 IR remote protocols. The system distinguishes between protocols using pin 3 (high for Sony, low for Philips) and processes 16-bit data to identify device codes and specific key presses. The code was developed using the Proton IDE environment, demonstrating a functional IR decoder capable of interpreting various control commands.Parts used in the PIC16F84A Remote Decoder:
- PIC16F84A microcontroller
- IR receiver module
- Proton IDE software
- Circuit board (Porta.3)
- Source code files (LINKS-5026.zip)
Sony and Philips RC5 protocol that works with the remote control of the code to learn a useful circuit on the circuit porta.3 pin 1 if sony 0 no RC5 philips decode the received 16-bit data of the 8-bit... Electronics Projects, Sony Philips RC5 IR Remote Decoder Circuit PIC16F84A "microchip projects, microcontroller projects, pic16f84 projects,
Sony and Philips RC5 protocol that works with the remote control of the code to learn a useful circuit on the circuit porta.3 pin 1 if sony 0 no RC5 philips decode the received 16-bit data of the 8-bit device code other 8-bit the read key is the value of various control with tried circuit is fine works beautifully. Codes were written with protons. Proton ide ready to read IR commands are used.
REMOTE DECODER WORK IMAGES
PIC16F84A REMOTE DECODER SCHMEATIC
PIC16F84A Remote Decoder proton ide source code files:
FILE DOWNLOAD LINK LIST (in TXT format): LINKS-5026.zip
Source: SONY PHILIPS RC5 IR REMOTE DECODER CIRCUIT PIC16F84A
Quick Solutions to Questions related to PIC16F84A Remote Decoder:
- Which microcontroller is used in this project?
The project uses the PIC16F84A microcontroller. - How does the circuit distinguish between Sony and Philips protocols?
It checks pin 3 where a high signal indicates Sony and a low signal indicates Philips. - What size data does the circuit decode?
The circuit decodes received 16-bit data consisting of an 8-bit device code and an 8-bit key value. - Which software was used to write the source code?
The codes were written using the Proton IDE. - Can this circuit read various control keys?
Yes, it reads the value of various control keys from the remote. - What file format are the source code downloads available in?
The source code files are provided in TXT format within a ZIP archive. - Does the circuit work with both Sony and Philips remotes?
Yes, the circuit works with the Sony and Philips RC5 protocol.
Related projects
PIC Stepper Motor Controller using PIC16F84A with Proteus Simulation
Introduction Stepper motors are widely used in embedded systems and DIY electronics projects where precise position control is required. This PIC Stepper...
Programmers & ICSP · PIC16F84APIC Musical Doorbell using PIC16F84A with Proteus Simulation
IntroductionThis microcontroller project demonstrates a musical doorbell built around a PIC16F84A and a simple piezo sounder.Using two push buttons, the system allows...
Beginner Tutorials · PIC16C84Exploring the World of PIC Microcontrollers: An Architectural Overview
A Peripheral Interface Microcontroller (PIC), developed by General Instruments Microcontrollers in 1993, operates under software control and is programmed to execute various...
Home Automation & SecurityVoice Activated Power Sockets (Home Automation)
Yet another voice controlled home automation system! As shown in the picture, the system can control any electrical appliance, by turning ON...
Home Automation & SecurityHome Security System with GSM Using 8051 Microcontroller
Security is a big challenge everywhere because thefts are increasing day by day owing to the unsafe and insecure security systems in...
Home Automation & SecurityHome Automation and Security System using Microcontroller ATMEGA8 with Arduino Programming
Home automation and security systems have become very popular these days, today industrial automation techniques are widely adopted by luxurious homes and...
Muhammad Bilal
I am a highly skilled and motivated individual with a Master's degree in Computer Science. I have extensive experience in technical writing and a deep understanding of SEO practices.