Summary of Interfacing SD card with PIC12F1822 (Raw data read)
This article details interfacing an SD card with a PIC12F1822 microcontroller to read raw data sectors without using file systems like FAT16/32. The system utilizes the MCU's built-in SPI module for communication and UART protocol via a MAX232 chip to display data on a serial monitor.Parts used in the SD Card Raw Data Read Project:
- PIC12F1822 microcontroller
- SD Card
- AMS1117 3.3V voltage regulator
- 3 x 3.3K ohm resistor
- 3 x 2.2K ohm resistor
- 10K ohm resistor
- 5 x 10uF polarized capacitor
- 100nF ceramic capacitor
- MAX232 chip
- Female RS232 connector
- 5V Power source
- Breadboard
- Jumper wires
With the tiny microcontroller PIC12F1822 we can read raw data (sectors) stored in the SD card. The SD card can work in SPI mode which makes our interfacing more better since the PIC12F1822 MCU has a built-in SPI module (MSSP module).
This post shows how to interface the SD card with the PIC12F1822 microcontroller in order to read the raw data stored in it (the SD card).
SD card raw data means that there is no use of system files like FAT16 or FAT32. Serial monitor is used to display the data after reading it and here the UART protocol is used.
the link below shows a small PIC12F1822 MCU UART example:
PIC12F1822 UART example with CCS C compiler
In this project I used the MMC/SD card driver for CCS C compiler which is described in the post at the link below:
MMC/SD Card driver for CCS PIC C compiler
Hardware Required:
- PIC12F1822 microcontroller
- SD Card
- AMS1117 3.3V voltage regulator
- 3 x 3.3K ohm resistor
- 3 x 2.2K ohm resistor
- 10K ohm resistor
- 5 x 10uF polarized capacitor
- 100nF ceramic capacitor
- MAX232 chip
- Female RS232 connector
- 5V Power source
- Breadboard
- Jumper wires
Interfacing SD card with PIC12F1822 MCU circuit:
for more detail: Interfacing SD card with PIC12F1822 (Raw data read)
Quick Solutions to Questions related to SD Card Raw Data Read Project:
- How does the SD card communicate with the PIC12F1822?
The SD card works in SPI mode, which is supported by the PIC12F1822's built-in MSSP module. - What type of data is read from the SD card?
The project reads raw data sectors without using system files like FAT16 or FAT32. - Which protocol is used to display the read data?
The UART protocol is used to send data to a serial monitor. - Can I use the CCS C compiler for this project?
Yes, the author used an MMC/SD card driver specifically designed for the CCS C compiler. - What power source is required for the circuit?
A 5V power source is required to power the setup. - Does the circuit require a voltage regulator?
Yes, an AMS1117 3.3V voltage regulator is included in the hardware list. - How many resistors are needed for the circuit?
The project requires three 3.3K ohm resistors, three 2.2K ohm resistors, and one 10K ohm resistor. - What component converts signals for the serial monitor?
A MAX232 chip is used along with a female RS232 connector for signal conversion.
Related projects
RFID Reader – Access Control System
This device is a simple access control system which uses RFID cards. It is designed with PIC12F1822 microcontroller running on internal oscillator...
Wireless & IoT · PIC12F1822Wireless Communication Using Cheap 433MHz RF Modules and Pic Microcontrollers. Part 2
On the first part of this instructable, I demonstrated how to program a PIC12F1822 using MPLAB IDE and XC8 compiler, to send...
Sensors & Temperature · PIC12F1822DHT11 Interfacing with PIC12F1822 microcontroller
In this blog there are some topics talking about the DHT11 relative humidity and temperature sensor and how to interface it with...
Communication & Interfacing · PIC18F4520CAN FD Node based on a PIC18 Microcontroller
The introduction sets the stage for an embedded systems project that involves developing a Embedded C CAN FD project using the MCP2517FD...
Communication & InterfacingLAN9662 Gigabit Switch: Optimized for Industrial Ethernet
Introduction It should come as little surprise therefore that one element of what is now more commonly referred to in some circles...
Communication & InterfacingPIC Microcontroller: Fundamentals & Applications for Students
Introduction Microcontrollers are the key components in the embedded systems market. A variety of embedded systems was formed and developed after the...
