The PIC 18 PIN (DIP) Development / Evaluations Board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18 Pin PIC16F1847. It can be used as a standalone demonstration board with a programmed part. With this board you can develop and prototype with all Microchip’s 18 PIN PIC microcontrollers. The board has a Reset switch and status LEDs. On board 3.3 V and 5V DC regulators allows using 3V and 5V PICs, This board support both 3.3V low power and normal 5V operation. All I/O Pins out with 2xfemale headers
Development Board Features:
- 16 I/O Ports
- Onboard 5V and 3.3V Supply
- 3.3V or 5V Supply selection by jumper
- Dual line I/O
- On board Power Indication
- On-board ICSP Port (PICKIT2 Standard Programming Port)
- Well labeled legends
- All outputs has provision for LEDs for output indication
- Replaceable PIC Microcontroller,
- Crystal and capacitor mounting under the PCB
PIC16F1847 Micro-Controller Specifications:
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- Internal 32MHz oscillator
- Integrated Capacitive mTouch Sensing Module
- Data Signal Modulator Module
- MI2C, SPI, EUSART w/auto baud
- 2 ECCP & 2 CCP (Enhanced/Capture Compare PWM)
- Comparators with selectable Voltage Reference
- 12 Channel 10b ADC with Voltage Reference
- 25mA Source/Sink current I/O
- Four 8-bit Timers (TMR0/TMR2/TMR4/TMR6)
- One 16-bit Timer (TMR1)
- Extended Watchdog Timer (EWDT)
- Enhanced Power-On/Off-Reset
- Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
- On Board In-Circuit Debug
- Wide Operating Voltage (1.8V – 5.5V)
- Low Power PIC16LF182x/4x variants (1.8V – 3.6V)
- Standby Current (PIC16LF1847): 30 nA @ 1.8V, typical
- Program Memory Type Flash
- Program Memory (KB) 14
- CPU Speed (MIPS) 8
- RAM Bytes 1,024
- Data EEPROM (bytes) 256
- Digital Communication Peripherals 1-UART, 1-A/E/USART, 2-SPI, 2-I2C2-MSSP(SPI/I2C)
- Capture/Compare/PWM Peripherals 2 CCP, 2 ECCP
- Timers’ 4 x 8-bit, 1 x 16-bit
- ADC 12 ch, 10-bit
- Comparators 2
- Temperature Range (C) -40 to 125
- Operating Voltage Range (V)1.8 to 5.5
- Pin Count 18
- XLP Yes
- Cap Touch Channels 12
Schematic
For more detail: 18 PIN PIC Development Board
Related projects
Breakout board for PIC16F1847 microcontroller
This is an improved version of my 18-pin PIC16F series breadboard module that I have used in many of my PIC tutorials...
Sensors & Temperature · PIC16F1847A brief overview of Allegro ACS712 current sensor using PIC16F1847 (Part 2)
In the first part of this discussion, the features of ACS712 device were briefly discussed. Now we will use that theory to...
Audio, Sound & Radio · PIC16F1847PIC16F1847 and AR1010 Based FM Radio Music Box
This is my first Instructable post. I made a Digital FM Radio box using this cheap AR1010 FM Radio receiver module that...
Development Boards & Kits · PIC18F4520Voltage Measurement with A PIC Microcontroller
Voltage Measurement with PIC Microcontroller articulates a methodical framework for facilitating analog voltage measurement using the PIC18F4520, an advanced member of Microchip’s...
Development Boards & KitsUltra-Low Power: Microcontroller Standby Current to 130uA with OPEnS Power Control Board
At the OPEnS Lab, a key focus for our projects is achieving exceptionally long battery life. This was particularly true for the...
Development Boards & KitsAn Integrated Approach to Developing Applications with Microchip PIC Microcontrollers
1. Introduction In our daily lives, a variety of devices such as telephones, household appliances, and cars incorporate "smart" electronics, typically manifested...
Ibrar Ayyub
I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough...