microcontroller project

PIC16F877 breadboard LCD 4-bit mode prototype setup

PIC16F877 Driving LCD in 4-Bit Mode using PIC16F877 with Proteus Simulation

Introduction This microcontroller project shows how a PIC16F877 can drive an LCD display using 4-bit mode inside a Proteus simulation.The project demonstrates LCD control with fewer data pins, making it useful for embedded systems where I/O pin saving is important.It is a practical electronics example for learning how a PIC microcontroller communicates with an alphanumeric […]

PIC16F877 Driving LCD in 4-Bit Mode using PIC16F877 with Proteus Simulation Read More »

PICDEM USB CDC evaluation board with LEDs and buttons

PICDEM FS USB CDC Evaluation Board using PIC18F4550 with Proteus Simulation

Introduction The PICDEM FS USB CDC Evaluation Board is a practical microcontroller project built around the PIC18F4550, designed to demonstrate USB communication using the CDC (Communication Device Class) protocol. This project allows a microcontroller to behave like a virtual serial port when connected to a computer, making data exchange simple and efficient. Using Proteus simulation,

PICDEM FS USB CDC Evaluation Board using PIC18F4550 with Proteus Simulation Read More »

PIC24 breadboard calculator with LCD and keypad

Calculator Test using PIC24FJ64GA006 with Proteus Simulation

Introduction The Calculator Test using EASYHDL is a practical microcontroller project built on the PIC24FJ64GA006 and simulated in Proteus. This project demonstrates how a keypad-based calculator can be implemented using embedded systems concepts. It uses a 4×4 matrix keypad for input and a 16×2 LCD display for output, making it a great example of DIY

Calculator Test using PIC24FJ64GA006 with Proteus Simulation Read More »

PIC18F4550 USB mass storage prototype setup

PICDEM FS USB Mass Storage Device using PIC18F4550 with Proteus Simulation

Introduction This microcontroller project demonstrates how to simulate a USB Mass Storage Device (MSD) using the PIC18F4550 in a Proteus simulation environment. The system mimics how a USB flash drive communicates with a computer, making it highly valuable for learning embedded systems and USB protocol basics. It is especially useful for students and engineers exploring

PICDEM FS USB Mass Storage Device using PIC18F4550 with Proteus Simulation Read More »

PIC12CE518 EEPROM project with seven-segment display

PIC12CE518 I2C EEPROM using PIC12CE518 with Proteus Simulation

Introduction This microcontroller project demonstrates how to write and read data using the internal I2C EEPROM of the PIC12CE518 and visualize the result through digital outputs. Designed and tested in Proteus simulation, the project highlights practical EEPROM interfacing—an essential concept in embedded systems and DIY electronics. The system writes a value (0x85) into EEPROM memory,

PIC12CE518 I2C EEPROM using PIC12CE518 with Proteus Simulation Read More »

PIC stepper motor breadboard control setup

PIC Stepper Motor Controller using PIC16F84A with Proteus Simulation

Introduction Stepper motors are widely used in embedded systems and DIY electronics projects where precise position control is required. This PIC Stepper Motor Controller microcontroller project uses a PIC microcontroller to control the direction of a stepper motor through simple push-button inputs. The project demonstrates how a PIC16F84A microcontroller can generate the required stepping sequence

PIC Stepper Motor Controller using PIC16F84A with Proteus Simulation Read More »

	GPS Projects
	Internet and LAN Projects
	Interfacing (USB) Projects
	Metering & Instrument Projects
	Sensor & Detector Projects
	Motor Based Projects
	Phone Based Projects
	Robotics and Automation Projects
	Camera, Imaging and Video Projects
	Game and Entertainment Projects
	Home Automation Based Projects
	Memory and Storage Projects
	RFID Based Projects
	Security and Safety Projects
	Sound and Audio Projects
	Temperature Measurement Projects
	DIY Projects
	Medical and Health Based Projects
	Battery Based Projects
	PWM Projects
	Radio Based Projects
	Other Projects
	Calculator Based Projects
	Car and Auto Projects
	LCD Based Projects
	LED Based Projects
	Clock and Timer Projects
	CNC Machines Projects
	Development Board Projects
	RTOS Projects

PIC16F877 Driving LCD in 4-Bit Mode using PIC16F877 with Proteus Simulation

PICDEM FS USB CDC Evaluation Board using PIC18F4550 with Proteus Simulation

Calculator Test using PIC24FJ64GA006 with Proteus Simulation

PICDEM FS USB Mass Storage Device using PIC18F4550 with Proteus Simulation

PIC12CE518 I2C EEPROM using PIC12CE518 with Proteus Simulation

PIC Stepper Motor Controller using PIC16F84A with Proteus Simulation

Top PIC Families

Resources

Advance Search