Summary of Remote controlled led dice using PIC12F629 microcontroller
This article describes a DIY project to build motion-controlled LED dice using a PIC12F629 microcontroller. The device features remote control functionality via an IR receiver and includes audio feedback from a speaker, powered by a 3.7V lithium-ion battery. The author emphasizes the unique motion-sensing aspect compared to standard electronic dice found online.Parts used in the Remote controlled led dice:
- 10mm led (7)
- vero board (3 piece 15*16 dots)
- 10k ohm (1)
- pic12f629
- 8 pin ic socket
- slide switch
- charging socket
- soldering wire
- some wires
- 3.7volt lithium ion battery
- speaker
- ir led
- remote controll
- some screw and nuts
Remote controlled led dice
I've always wanted to build an electronic led dice, but something different from what we see on the internet. Making it motion controlled... now that's new! I make remote controlled led dice please share with every one and like my projects
Tools
2. veroboard cutting tools
3. drill machine
4. helping hand
Parts
2. vero board (3 piece 15*16 dots)
3. 10k ohm (1)
4. pic12f629
5. 8 pin ic socket
6. slide switch
7. charging socket
8. soldering wire
9. some wires
10. 3.7volt lithium ion battery
11. speaker
12. ir led
13. remote controll
14. some screw and nuts
Quick Solutions to Questions related to Remote controlled led dice:
- What makes this LED dice different from others?
It is motion controlled and uses remote control functionality. - How is the device powered?
It uses a 3.7volt lithium ion battery with a charging socket. - Which microcontroller is used for the project?
The project utilizes a pic12f629 microcontroller. - Can the dice produce sound?
Yes, it includes a speaker for audio output. - How many LEDs are required for the build?
You need seven 10mm leds for the construction. - What type of boards are used as the base?
The design uses three pieces of vero board measuring 15*16 dots each. - How do you control the dice remotely?
An ir led and a remote controll are used for operation. - What tools are necessary for soldering?
A soldering iron with stand and helping hand are listed as essential tools. - Is a switch included in the parts list?
Yes, a slide switch is used to manage power or functions.
Related projects
RGB LED PWM Driver for High Power 350mA LEDs using PIC12F629
Description This project combines a PIC and three constant current 'buck' converters to produce an RGB LED controller that will operate with...
Communication & Interfacing · PIC12F629Wireless controlled lightdimmer using PIC12F629
The meaning from this design is to build it in -i.e. a shaded lamp- and to switch this lamp on and off...
LED Projects · PIC12F629Navigation Lights for Models for PIC12F629
Description This project was inspired from a post on the Picprojects forum where a member had adapted the RGB Moodlight project for...
Communication & Interfacing · PIC18F4520CAN FD Node based on a PIC18 Microcontroller
The introduction sets the stage for an embedded systems project that involves developing a Embedded C CAN FD project using the MCP2517FD...
Communication & InterfacingLAN9662 Gigabit Switch: Optimized for Industrial Ethernet
Introduction It should come as little surprise therefore that one element of what is now more commonly referred to in some circles...
Communication & InterfacingPIC Microcontroller: Fundamentals & Applications for Students
Introduction Microcontrollers are the key components in the embedded systems market. A variety of embedded systems was formed and developed after the...
Ibrar Ayyub
I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough...