output

DUAL FREQUENCY GNSS MODULE ENABLES SUB 1M ACCURACY

DUAL FREQUENCY GNSS MODULE ENABLES SUB-1M ACCURACY

OriginGPS has announced its first dual-frequency GNSS module, the ORG4600-B01, which will enable customers to build systems with sub-1m accuracy without implementing external components. by Jean-Pierre Joosting @ www.mwee.com Measuring just 10- x 10-mm, the ORG4600-B01 module supports L1 + L5 GNSS reception with one RF port, enabling the use of a low-cost, dual-band antenna delivering

DUAL FREQUENCY GNSS MODULE ENABLES SUB-1M ACCURACY Read More »

Circuit Diagrams.3

How to interface LCD with PIC18F4550 Microcontroller

The character LCDs are the most commonly used display modules. These LCDs are used to display text using alphanumeric and special characters of font 5×7/5×10. For basic working and operations of a character LCD, refer LCD interfacing with 8051. Here PIC18F4550 has been used to display a single character on a 16×2 character LCD. For basic details and operations of character

How to interface LCD with PIC18F4550 Microcontroller Read More »

Circuit Diagrams 3

How to display text on 16×2 LCD using PIC18F4550 Microcontroller

Several automated and semi-automated devices require a message to be displayed in order to indicate their working status. In continuation to LCD interfacing with PIC18F4550, this article explains how to display a message or string on a 16×2 character LCD. Programming steps: ·         Configure the LCD. ·         Store a string in a character array. unsigned char data[20]=“EngineersGarage”; ·         Run a

How to display text on 16×2 LCD using PIC18F4550 Microcontroller Read More »

WAFER LEVEL CAMERA MODULE MEASURES ONLY 0.65 X 0.65 X 1.158MM

WAFER-LEVEL CAMERA MODULE MEASURES ONLY 0.65 X 0.65 X 1.158MM

OmniVision Technologies has released a fully packaged, wafer-level camera module measuring just 0.65×0.65mm and 1.158mm tall. Built around the company’s Guinness World Record breaking image sensor, only 0.575mm by 0.575mm, the OVM6948 CameraCubeChip was developed as a disposable medical imager, preventing cross-contamination risks while providing deeper anatomical access without being too invasive. OmniVision Technologies, Inc., a

WAFER-LEVEL CAMERA MODULE MEASURES ONLY 0.65 X 0.65 X 1.158MM Read More »

Symbol of Ohm

How to work with inbuilt ADC Module of PIC Microcontroller (PIC18F4550)

A microcontroller, a digital device, can read, execute and transmit only digital signals. On the contrary, the outputs of the most of the transducers are analog in nature. Thus it is hard to interface these transducers directly with controllers. Analog-to-digital convertor (ADC) ICs are one way to make the analog input compatible with the microcontroller. Using

How to work with inbuilt ADC Module of PIC Microcontroller (PIC18F4550) Read More »

Using PIC’s Analog Comparator

How to work with inbuilt Analog Comparators of PIC18F4550- (Part 12/25)

Analog comparators, including inbuilt Analog Comparators, are electronic devices which compare the two voltage signals and provide TTL logic output to indicate the larger signal. The analog comparator is used in various applications where two input signals need to be compared. IR sensor is a very common example where analog comparator is used. PIC18F4550 has two in-built

How to work with inbuilt Analog Comparators of PIC18F4550- (Part 12/25) Read More »

How to interface GPS with PIC18F4550 Microcontroller- (Part 16/25)

Global Positioning System is based on satellite navigation technology. A GPS Receiver provides the accurate location of an object in terms of latitude and longitude. Accurate time calculation with respect to GMT can also be done by using GPS. For more information on different data obtained through GPS, refer GPS Receivers. Here a PIC microcontroller has been interfaced with

How to interface GPS with PIC18F4550 Microcontroller- (Part 16/25) Read More »