The time keeping is provided by DS3231 RTC chip with an integrated high accuracy (± 5ppm) MEMS crystal. This makes PCB design very simple, as one does not need to take care on special traces design around the crystal. The chip is powered via the VBAT pin with VCC pin being grounded. This way its […]
LCD clock with 4″ display Read More »
This PIC16F877 microcontroller tutorial provides very detailed and comprehensive LCD[1] code. Using PIC16 simulator (Proteus) you can verify this LCD code and change it according to your needs. This code is written in C language using MPLAB with HI-TECH C compiler. You can download this code from the ‘Downloads‘ section at the bottom of this page. It is
PIC16F877 LCD code and Proteus simulation Read More »
This project is a USB Generic Human Interface Device (HID) device based on a PIC microcontroller. It is a USB interface for alphanumeric LCD display where the user as desired can program it. USB interface is implemented by using PIC18F2550 microcontroller ideal for low power (nanoWatt) and connectivity applications that benefit from the availability of
USB LCD Controller Read More »
Always the right time and date with DCF77 This project make use of a PIC16F628(A) and a DCF77 receiver from Conrad (Orderno. 64 11 38) Optional there is a possibility to connect an electronic gong on it. Click for information about DCF77 on the link underneath: The working from the DCF77 time signal Connect the output from the
Digital DCF77 clock with LCD and gong using PIC16F628A Read More »
This PIC LCD volt meter project uses a PIC micro and an HD44870 LCD display. The analogue input is taken directly to the analogue input pin of the microcontroller without any other processing. Specification Voltage range 0V – 5V Input signal level TTL Maximum input impedance 2k5 The LCD volt meter uses the microcontroller power
Schematics and C code for a 0-5V PIC LCD Volt Meter. using pic microcontoller Read More »
Here is 0 to 99 minutes relay timer using PIC16F628 microcontroller and 16 character LCD display. The microcontroller is PIC16F628A running at 4.0 MHz clock using an external crystal. An HD44780 based 16×2 character LCD is the main display unit of the project where you can watch and set the timer duration using tact
PIC MICROCONTROLLER PROJECTS AND LCD CIRCUITS Read More »
A simple project to test and display the transmitted codes from remote controls which work with the RC5 protocol, like the TV remotes from Philips, just aim the remote control at the TSOP1736 IR-receiver. If you only want to know the code from a button then you can ofcourse also look at the RC5 tables
RC5/RC6 codes on a LCD using PIC16F648A Read More »
This post explains the idea of creating custom characters on any LCD ( e-g on 16×2 LCD ) which has HD44780U controller in it. Almost all 16×2 or 20×2 LCDs have HD44780U controller in them[1]. This controller provides the functionality of CGRAM ( Character Generator RAM ). We can write character patterns on this RAM
How to display custom characters on LCD using PIC16F877 Read More »
