Low power MCU family offers power-saving peripherals, hardware safety, and secure code protection System developers of battery-powered and other power-conscious designs with and without LCD displays can now easily add an array of innovative features using a new line of PIC® eXtreme Low Power (XLP) microcontrollers (MCUs) from Microchip Technology Inc. Packed with 14 types […]
NEW PIC24F MCUS ARE AEC Q100 GRADE 1 QUALIFIED Read More »
Introduction This project was done in order to allow a PIC32MX250F128B to act as a host to a USBmass storage device. This would allow for a USB flash drive to be connected to the PIC32which would allow for data to be read from or stored to a flash drive by the PIC32. This could beuseful
Using the PIC32MX250F128B as a USB Host to Interface With Mass Storage Devices Read More »
The STM32H723/733, STM32H725/735, and STM32H730 lines are leaning on the STM32H7 DNA The STM32H723/733, STM32H725/735, and STM32H730 lines are leaning on the STM32H7 DNA. They provide maximum performance up to 550 MHz, high integration with embedded Flash memory of 128 KB (for STM32H730 family) and up to 1 Mbyte (for STM32H723/733 and STM32H725/735 family), advanced
STMICROELECTRONICS STM32H723-733 725-735 & 730 ARM® CORTEX®-M7 CORE Read More »
MYIR introduces FZ5 EdgeBoard AI Box which is a rugged and fanless AI (Artificial intelligence) edge computing box with a built-in FZ5 AI Accelerator Card. The AI Box is based on Xilinx Zynq UltraScale+ ZU5EV MPSoC which features a 1.5 GHz quad-core ARM Cortex-A53 64-bit application processor, a 600MHz dual-core real-time ARM Cortex-R5 processor, a Mali400 embedded GPU, a H.264/H.265 Video Codec Unit (VCU) and
MYIR INTRODUCES FZ5 EDGEBOARD AI BOX AND ACCELERATOR CARD Read More »
The present project called PLC with Pic CI16F877A is based on the operation of a PLC, today we can see these systems in industries, mining, etc. It is used to program an industrial PLC, it is the ladder language or (LADDER). The project has the advantage of loading the program directly through the pickit3 so
PLC Con El CI16F877A Read More »
Microchip Technology has introduced the 25CSM04, a new high-density EEPROM (Electrically Programmable Read-Only Memory) with 4Mbit Memory, this doubles the 2 Mbit density with which the designers were previously limited to. The Developers were previously using NOR Flash ICs for the 2Mbit + nonvolatile data set application. Since the EEPROM has a better performance advantage than
HIGH DENSITY 4MBIT SERIAL EEPROM FOR PORTABLE CONSUMER AND MEDICAL DEVICES Read More »
In the Darwin family, the MAX32670 is an ultra-low power, cost-effective, high reliability 32-bit microcontroller enabling designs with complex sensor processing without compromising battery life. It combines a flexible and versatile power management unit with the powerful Arm® Cortex®-M4 processor with floating point unit (FPU). The MAX32670 also offers legacy designs an easy and cost optimal
SecurityHardware.com is set to take FT2232H-based USB Serial Adapters and Debuggers to the Next Level. The Portland-based company will soon be launching a Crowdfunding campaign for its latest design, an open-source FTDI FT223H-based multi-protocol, multi-voltage hardware hacking device called Tigard. Tigard is a one-stop board for developers looking for something a little more than the average USB-UART debugging tool. Speaking
MEET THE TIGARD BOARD; A NEW FT2232H-BASED USB SERIAL ADAPTER/DEBUGGERS Read More »
Ever wish the Staples Easy Button (R) could say something better than the mundane “That was easy.”? How about a Lil Jon button? YEAAAUGH, OKKKAY! LET’S GO! Attachments liljon_board.zipDownload liljon_project.zipDownload Step 1: What You Will Need (and Where to Get It): NOTE: You will need a way to program a dsPIC33 (a microcontroller from Microchip.com).
YEAAAUGH, WHHAT? OKKKAY! Lil Jon Easy Button Read More »
The flashing LED is a tried and tested way of getting your board working, but it is somewhat tired as well. Since we have been supplying the proto shield with the blueberry purchases I thought it would be a good idea to do something different with the traditional “Hello World” project.This project is intended for
