One of the most harmful airborne pollutants with respect to human health is particulate matter. Air particle counters are used to determine the air quality by counting and sizing the number of particles in the air. This information is useful in determining the amount of particles inside a building or in the ambient air. It is also […]
MYPART, AN OPEN SOURCE PORTABLE AIR PARTICLE COUNTER Read More »
Exactly 30 years ago a great disaster struck the region of Chernobyl: a nuclear accident occurred that released a large quantity of radioactive particles into the atmosphere. And it is only five years ago that, with the Fukushima Daiichi nuclear disaster, a second similar catastrophic event has taken place. These anniversaries did not directly let me build a PIN Photodiode based Geiger Counter,
30th Anniversary of the Chernobyl Tragedy – or – Building a PIN Diode Geiger Counter Read More »
Introduction A few months ago I purchased a Philips PM6674 frequency counter on eBay. It’s an older 9 digit counter with two channels that has a maximum input frequency of 550MHz. The design feels dated compared to more modern counters, such as my Agilent 53131A. However, it is still a fully functional piece of lab
Fluke/Philips PM66xx Frequency Counter OCXO Upgrade Read More »
This article describes a 2-Digit Counter using a Microchip PIC12F629. It shows what can be done with an 8-pin chip having just 5 output lines and one input line. The chip drives two7-segment displays and this would normally require 7 lines to drive the segments plus another one or two lines to select the displays.
2 Digit Counter using PIC12F629 Microcontroller Read More »
This is a simple digital counter with a serial rs-232 and a 7 segment display, i started this project to count items on some shelfs, but it can be used for anything, it is also, for the exception of the connectors, completely on SMD components. The circuit is made around a PIC16F88, and takes use
UP/DOWN counter with memory Read More »
Couple of weeks ago I purchased from eBay one of these amazingly cheap an useful modules with MAX7219 LED driver and 8 digit LED display. It is ideal for frequency counter project. The problem was the absence of library for PIC microcontrolers. Luckily, I found a great library for Arduino and I reworked it to
100MHz frequency counter with PIC16F628A – LED Display Read More »
Introduction I assembled my Geiger counter kit from MightyOhm some time ago. It’s a very fun kit and the finished counter looks awesome. Oh, that Geiger-Muller tube sitting on that yellow PCB! I’ve always wanted to modify it somehow and add functionality. Today I realized that an Adafruit Feather sits PERFECTLY where the AAA battery
Wi-Fi and OLED Upgrade for MightyOhm Geiger Counter Read More »
Background Most multimeters can measure frequency, but they are not sensitive and the max frequency is not always so high. The same problem can be found with older frequency counters. This project will describe a prescaler which will work up to 2.5GHz and with very high input sensitivity. The prescaler will divide the input frequency
Poor man’s counter using PIC16F84 microcontroller Read More »
This PIC frequency counter project uses an LCD to display the frequency and PIC timer 1 to measure the input signal and Timer0 to measure the timing period. It uses Timer 1 in 16 bit counter mode to count the input signal edges and overflows of the counter are accumulated to give the total count
A PIC frequency counter operating up to about 50 MHz. usnig pic microcontoller Read More »
