bluetooth | Battery Guide

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD

A few months ago, in November 2018, we talked about the possibility of combining both WiFi 5 and Bluetooth 5 into one board. The UNISOC UWP5661 was a chip that could make that possible and the same chip powers the IVY5661 96Boards IoT board. At the time of posting about the IVY5661 board and the relatively unknown WiSoC chip little information was available. The product board […]

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD Read More »

TINYWIFI 5G – A CLONE OF NANOPI NEO AIR WITH 5GHZ WIFI

Back in 2016, FriendlyARM launched the NanoPi NEO Air, an ARM-based board that featured Allwinner H3 processor, 2.5GHz WiFi, Bluetooth 4.0 LE, a camera DVP interface, and a ton of GPIO pins. The board was relatively powerful for it’s Nano size and it now costs around $28. Fast Forward to 2019, we have a new board called the TinyWiFi 5G based around the same NanoPi

TINYWIFI 5G – A CLONE OF NANOPI NEO AIR WITH 5GHZ WIFI Read More »

INSULIN INJECTION MONITOR DOSAGE AND WIRELESSLY TRANSMITS DATA TO SMARTPHONE

DIABNEXT’s ‘CLIPSULIN’ device attaches to insulin pens and employs Nordic’s nRF52832 SoC to wirelessly send recorded insulin injection data via Bluetooth LE or NFC. Nordic Semiconductor today announces that Taiwan-based DIABNEXT, a healthcare services company, has selected Nordic’s nRF52832 System-on-Chip (SoC) to provide the Bluetooth® Low Energy (Bluetooth LE) wireless connectivity for its ‘CLIPSULIN’ insulin

INSULIN INJECTION MONITOR DOSAGE AND WIRELESSLY TRANSMITS DATA TO SMARTPHONE Read More »

PYBOARD D SERIES MICROPYTHON BOARD FEATURES STM32F7 MCU, WIFI AND BLUETOOTH

Pyboard D-series (aka Pyboard D, or just PyBD) board was introduced during the Micropython presentation at FOSDEM 2019 and it’s build around a faster STM32F7 Cortex-M7 MCU, with 512Kb of RAM, and 2Mb of Flash, as well as built-in WiFi and Bluetooth connectivity. It also features a pair of external Flash chips and a micro SD card slot for additional expansion

PYBOARD D SERIES MICROPYTHON BOARD FEATURES STM32F7 MCU, WIFI AND BLUETOOTH Read More »

TYRE PRESSURE MONITORING SYSTEM USING BLUETOOTH LOW ENERGY

A tyre pressure monitoring system (TPMS) aims to monitor air pressure on various automotive systems. The most common TPMS sensors mainly use sub-GHz radio standards to transfer information to the vehicle’s computer. There are two different types: direct (dTPMS) and indirect (iTPMS). The use of bluetooth low energy (BLE) connectivity makes it possible offering a high

TYRE PRESSURE MONITORING SYSTEM USING BLUETOOTH LOW ENERGY Read More »

AUDIO AMPLIFIER BOARD SUPPORTS BEKEN BK3266 BLUETOOTH 5.0 CHIP

IC station has posted a $10.59 audio amplifier board that supports Bluetooth 5.0 via Beken BK3266 Bluetooth audio chip. For the board to work, you will have to connect buttons, a microphone and 10W or 15W speakers. The hardware setup has to be completed with a power source and an optional input audio signal. After setting it up, the board

AUDIO AMPLIFIER BOARD SUPPORTS BEKEN BK3266 BLUETOOTH 5.0 CHIP Read More »

NEED WIFI 5 AND BLUETOOTH 5? THEN TRY OUT UNISOC UWP5661

WiFi 5 also known as 802.11ac has been around for a while now, but few boards have adopted it. The WiFi 5 might easily be confused with the general WiFi (802.11 b/g/n). The WiFi standard 802.11ac is capable of 1300 megabits per second (Mbps) which is the equivalent of 162.5 megabytes per second (MBps), this is 3x faster than

NEED WIFI 5 AND BLUETOOTH 5? THEN TRY OUT UNISOC UWP5661 Read More »

QUALCOMM LAUNCHES 10NM, OCTA-CORE QCS605 IOT SOC

Qualcomm announced back in April its QCS605 SoC, calling it “the first 10nm FinFET fabricated SoC, built for the Internet of Things.” The octa-core Arm SoC is available in an Intrinsyc Open-Q 605 SBC with the full development kit, including a 12V power supply which is available for pre-order at $429. The product will ship in early December. The

QUALCOMM LAUNCHES 10NM, OCTA-CORE QCS605 IOT SOC Read More »

Bluetooth Controlled Robot using pic microcontroller

Today I came up with another engineering project for electronics and communication students, Android and Bluetooth controlled robot using PIC Microcontroller with object detecting capability. After installing MikroElectron’s Robot Control App from Play Store you should be able to control the robot with your android phone/ tablet over bluetooth signal. The eye catching feature of this project

Bluetooth Controlled Robot using pic microcontroller Read More »

TS-7553-V2 – IOT-READY SBC WITH RELIABLE STORAGE, CELL MODEM, XBEE, POE

This versatile embedded single board computer hits on all the main points for a low power, cost-effective, Internet-of-Things (IoT) capable, and ready-to-deploy OEM board with an emphasis on data integrity. The TS-7553-V2 offers the ability to communicate seamlessly with several different networks simultaneously from a single device. Using the onboard peripherals the system can connect to Ethernet,

TS-7553-V2 – IOT-READY SBC WITH RELIABLE STORAGE, CELL MODEM, XBEE, POE Read More »