This instructable describes how to integrate hobby servos (the kind used in RC planes, cars, etc.) into your microcontroller projects. Step 1: How Servos are Different from Regular Motors In a regular DC motor, the amount of torque the motor exerts on the shaft is proportional to the amount of current flowing through the motor. […]
Use a PIC Microcontroller to Control a Hobby Servo Read More »
Introduction I always thought the clapper so cool. For those who are lazy like me, turn on or off the bedroom light without getting out of bed, simple clap your hands is amazing. Thinking about it I projected one for me. Several projects of clappers can be found on the Internet, and most of them
Microcontroller Clapper Switch Read More »
This project is a micro controller chess game. The objective has to be able to play chess on a VGA monitor, including an intelligent computer to play against. This all has been accomplished with a microcontroller. I started this as a project for the college ( I am a Electrical Engineering student ), but it
Galvanic from PC isolated PIC programmer The Wisp648 from www.voti.nl is an In Circuit Serial Programmer to program a flash PIC which mostly can stay in your circuit. No irritating doings like pulling the PIC out of the PCB, place it in the programmer, programming it, pull it out the programmer and place it back
Low cost ICSP PIC-programmer using PIC16F648A Read More »
Here’s the minimal code to make timer 1 (a 16 bit timer) work using PICBasic. General descriptions of PIC timer variables used to control the timer: (you should be able to use these no matter what programming language you use): T1CON.0 is the first bit of the timer configuration byte, this bit is used to
PIC micro Timer Code Read More »
These days I was thinking about a better PIC programmer that can work with MicrochipMPLAB IDE software so that I can write my own programs or edit someone else’s programs. I found that there are numerous versions of the famous Microchip PICkit 2 on the web. Some of them are using the original schematic published
Original PICKIT-2 microcontroller programmer Read More »
uni5_a.bmp – PCB of parallel programmer UNIPROG V-A uni5_as1.bmp – schematic diagram of G.Tait’s programmer with 4066 uni5_ao1.bmp – layout of components of G.Tait’s programmer with 4066 List of components: 1 x slot for ISO card (eight pins are enough) 1 x female Centronix connector 36pin 1 x 74LS06 (7406) or 74LS07 (7407) 1 x
PIC programmers for parallel port Read More »
PIC Programmer MkV is designed to get you into PIC Programming for just a few dollars. It uses just 12 components. Most of them will be in your “junk-box” and the PC board is a small piece of matrix board. It’s the cheapest way to get started. As well as PIC PROGRAMMER MkV you will
PIC PROGRAMMER MkV using PIC12F629 Read More »
I was trying to think of a suitable name for this project, and after literally seconds of careful deliberation, I gave up and decided to call it Fluffy. Sorry. Anyway, Fluffy is a SX programmer for people who havealready experimented with PIC chips, and want to try out the Scenix SX family. I built Fluffy
“Fluffy” – A Scenix (and PIC) Programmer Read More »
What is a PIC Microcontroller? PIC (Peripheral Interface Controller) is a microcontroller family developed by the Microchip Technology. It plays important role in embedded systems.Low cost, serial programming capability, reprogramming of the flash memory, availability of free developing tools, large user database, etc. are some of the PIC microcontroller features which make it a best
Getting started with PIC Microcontroller Programming Read More »
Your one-stop destination for PIC microcontroller projects, tutorials, PDFs, software, tools and everything embedded. Built for students, hobbyists & engineers.
PIC Microcontroller has been helping students and engineers since 2008 by providing high quality PIC projects and resources. We are passionate about embedded systems and microcontroller development.
© 2008 – 2026 PIC Microcontroller. All Rights Reserved.