Summary of WM1302 LORAWAN GATEWAY MODULE (SPI) – US915, BASED ON SX1302
WM1302 is a mini-PCIe LoRaWAN gateway module based on Semtech SX1302, offering very low power consumption, high sensitivity, and low operating temperature. It supports SPI and USB interfaces across US915 and EU868 (and other regional plans), comes in a 52-pin mini-PCIe form factor, and is CE, FCC, and TELEC certified for easier product certification and gateway, miner hotspot, and IoT gateway applications.
Parts used in the WM1302 LoRaWAN Gateway Module:
- Semtech SX1302 baseband LoRa chip
- SX1250 TX/RX front-end
- Mini-PCIe 52-pin connector (golden finger)
- SPI interface implementation
- USB interface implementation
- Power supply circuitry supporting 3.3V TX power up to 26 dBm
- PCB and supporting passive components for module integration
- Regulatory compliance components for CE, FCC, and TELEC certification
WM1302 module is a new generation of LoRaWAN gateway module in mini-PCIe form-factor based on Semtech® SX1302. It features extremely low power consumption, outstanding performance with CE, FCC, Telec certified.
WM1302 module is a new generation of LoRaWAN gateway module with mini-PCIe form-factor. Based on the Semtech® SX1302 baseband LoRaWAN® chip, WM1302 unlocks the greater potential capacity of long-range wireless transmission for gateway products. It features higher sensitivity, less power consumption, and lower operating temperature compared with the previous SX1301 and SX1308 LoRa® chip.
WM1302 LoRaWAN gateway module has SPI and USB versions on both US915 and EU868 frequency bands, enable you to have a wide-range of LoRaWAN frequency plans options to choose including EU868, US915, AS923, AS920, AU915, KR920, and IN865.
Features
- Powered by Semtech® SX1302 baseband LoRa® chip, extremely low power consumption and high performance.
- Mini-PCIe form factor with the standard 52-pin golden finger, easy to integrate with various gateway devices.
- Ultra-low operating temperature, no additional heat dissipation needed, reducing the size of LoRaWAN gateway.
- High sensitivity down to -139 dBm @SF12 with SX1250 TX/RX front-end; TX power up to 26 dBm @3.3V.
- Certified with CE, FCC, and TELEC. Simplify the final product certification process.
WM1302 module is CE, FCC and Telec certified, which helps simplify the development and certification process of the LoRaWAN gateway devices.
WM1302 is designed for M2M and IoT applications and can be widely applied in LPWAN gateway supported scenarios. It would be a perfect choice for you to significantly reduce the technical difficulties and time-consumption when developing the LoRa gateway devices, including LoRaWAN gateway, miner hotspots, etc.
Read more: WM1302 LORAWAN GATEWAY MODULE (SPI) – US915, BASED ON SX1302
- What chip does the WM1302 use?
It uses the Semtech SX1302 baseband LoRa chip. - What form factor is the WM1302 available in?
It is in a mini-PCIe form factor with a standard 52-pin golden finger. - Which interfaces does the WM1302 support?
It supports SPI and USB interfaces. - Which frequency plans are available for the WM1302?
It supports EU868, US915, AS923, AS920, AU915, KR920, and IN865 frequency plans. - What is the sensitivity of the WM1302?
It achieves sensitivity down to -139 dBm at SF12 with the SX1250 TX/RX front-end. - What is the maximum TX power and voltage for the WM1302?
TX power is up to 26 dBm at 3.3V. - Is additional heat dissipation required for the WM1302?
No, it has ultra-low operating temperature and does not require additional heat dissipation. - Which certifications does the WM1302 have?
It is certified with CE, FCC, and TELEC. - What application scenarios is the WM1302 designed for?
It is designed for M2M and IoT applications, including LoRaWAN gateways and miner hotspots.
