WITH THE NEW R&S NRX RF POWER METER, EVEN COMPLEX TEST SETUPS CAN BE CONFIGURED QUICKLY




Rohde & Schwarz has equipped the new RF power meter with a touchscreen based operating concept that guides the user through configuration. The R&S NRX has up to four measurement channels, for which Rohde & Schwarz offers a wide range of power sensors. For the first time, both terminating and directional power sensors are supported in a single instrument.

WITH THE NEW R&S NRX RF POWER METER, EVEN COMPLEX TEST SETUPS CAN BE CONFIGURED QUICKLY

High-precision RF power measurement for modern applications is a challenge. Rohde & Schwarz is launching the R&S NRX on the market so that users can transparently configure their measurements and perform them conveniently. The R&S NRX even makes it possible to perform triggered and synchronized multichannel measurements with different power sensors.

The user operates the instrument via the integrated high-resolution 5″ touchscreen. Measurements are configured using large buttons. The system supports the user with a logical calibration and draws attention to conflicts in case of doubt. If required, the instrument can also be operated using the buttons on its front panel.

The R&S NRX comes as standard with two robust sensor ports, which can be optionally upgraded to four. In addition, sensors can also be connected via USB or Ethernet.

Key Facts

  • Intuitive operation with touch screen based GUI
  • Supports up to four R&S®NRP and R&S®NRQ6 power sensors
  • Supports all sensor-dependent measurement functions
  • Optional high-precision CW and pulse mode reference source module
  • Optional power reflection measurements with NRT-Zxx sensors

Wide range of power sensors

The user can connect all terminating power sensors from the Rohde & Schwarz portfolio to the sensor connectors. The R&S NRX-B9 sensor interface module integrates the directional power sensors of the R&S NRT-Z family into the measurement to determine power in both transmission directions.

READ  Staff with Click Sound and Obstacle Alarm

Reference generator integrated as a module

With the optional R&S NRX-B1 sensor check source module, users can test sensors for a pending measurement. The high-precision 50 MHz/1 GHz reference generator module generates continuous-wave signals as well as pulsed steep-slope signals.

Read more: WITH THE NEW R&S NRX RF POWER METER, EVEN COMPLEX TEST SETUPS CAN BE CONFIGURED QUICKLY




Leave a Comment

*
= 4 + 7

Read previous post:
8X8 MATRIX LED
8X8 MATRIX LED SCROLLING TEXT CIRCUIT RS232 SENDING TEXT

8x8px LED matrix marquee project pic16c52p microcontroller based on the circuit program prepared for the RS232 port negotiation make up...

Close
Scroll to top