Hello friends, first of all I wanna give a good news to all the readers that I have added a Google search engine in TEP, which was missing for quite a long time. I was receiving a lot of complaints regarding this issue that we are unable to search the topic in the blog so […]
If you experiment with electronics whatsoever, a multimeter is pretty much the minimum you’ll need instrument-wise. This, however, only tells you some of the stories. Sure, you’re reading 5 volts, but how steady is that reading? To really tell what’s going on, you’ll need an oscilloscope. Fortunately, with advances in microelectronics, basic oscilloscopes no longer have
For more detail: Teardown & Repair of the Siglent SHS810 100MHz 1GS/s Portable Oscilloscope & Multimeter
Teardown & Repair of the Siglent SHS810 100MHz 1GS/s Portable Oscilloscope & Multimeter Read More »
I wanted to probe a PCB at work to see how a ~500MHz differential clock was behaving. My trusty 100MHz oscilloscope was no use, it was too slow to see anything and unfortunately I couldn’t quite justify buying a $3k differential probe for my faster scope just for this. There are a bunch of DIY
An almost-GHz active differential oscilloscope probe Read More »
Inroduction More and more experiments are now ‘PC-assisted.’ Also conventional acquisition systems are very expensive. Since portable PCs are today common and a USB link is a better solutionhere we present an oscilloscope using USB port of the PC that operates at up to 10 kHz with ±16V input voltage. It has much more improved features than the PC-based oscilloscope . The oscilloscope uses IC
Details • The world’s first lab device to target OS X, Linux, Windows, Android and iOS (jailbroken) compatibility. • Get mobile: take the SmartScope on the road, thanks to the single-cable connectivity. • Intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes. • Develop your digital interfaces using the 100MS/s logic
LabNation SmartScope: unique multi-platform USB oscilloscope Read More »
sing simple wires to measure signals with the oscilloscope would result in unreadable plots on the scope, the main reason being the noise coupled onto the “probe” itself. The first line of defense against that would be to use a coaxial cable as a probe, which would prevent external noise coupling. 1. Introduction An unwanted
Features Features are summarized herebelow, and can be seen in the wavewatch13 (updated 15/05/2015). Up to two channels (A&B) at 44100Hz sampling frequency, Time range from 10µs to 500ms, Channel gain adjustment with voltage estimation based on online tuning, Channel Enable/disable, offset with dedicated marking Channel triggering source and level selection Automatic and single shot
Wavewatch, a soundcard oscilloscope and waveform generator Read More »
Another look at the hardware in the SDS7102 May 27, 2016 This is a post in a series about me poking at the insides of my OWON SDS7012 oscilloscope. You might want to start reading at the beginning. I’ve been a bit busy with work lately and haven’t had time to do a lot of
Inside the SDS7012 Oscilloscope: Mainboard Analysis Read More »
Professionals, school laboratories and amateurs can now gain this new, extra affordable digital MSO oscilloscope in a limited offer. Probably you may have noticed, that company Hameg became a member of Rohde&Schwarz group and new oscilloscopes already carry only an R&S logo. However the name of series HMO remains, which represents for several years products
It´s hard to resist to R&S HMO1002 oscilloscope for 610 Euro Read More »
