This topic gives a short descriptions about PIC12F1822 microcontroller ADC and PWM module and how to use them using CCS PIC C compiler. For more details go to PIC12F1822 datasheet. PIC12F1822 ADC Module: PIC12F1822 microcontroller has a 10-bit ADC (Analog-to Digital Converter) module. 4 Pins can be used as analog inputs which are: RA0 (AN0), […]
PIC12F1822 ADC and PWM modules Read More »
he LMZM33603 36V, 3A power module offers stellar EMI performance in a compact QFN package. Order yours today and enjoy the peace of mind that comes with reliable performance, small solution size, and reduced design cycle time. Powering high-current processors requires flexible solutions, and the TPS53681 PMBus multiphase PWM buck controller delivers with dual output
SIMPLIFY YOUR DC/DC #DESIGN WITH @TEXASINSTRUMENTS VIA @OEMSECRETS Read More »
Expanding its range of embedded-core DC/DC converters, Murata Power Solutions adds the NXF1 series of regulated, high isolation converter with 3.3 or 5.0V outputs. Inputs available are nominal 3.3 and 5.0V in an industry-standard, surface-mount package with a low profile of 5.1mm. Line regulation is typically better than 0.03 per cent and load regulation is
1W REGULATED SMT DC/DC CONVERTER CAN BE USED IN ALTERNATIVE ENERGY Read More »
The bq25504 from Texas Instruments is a good candidate to become a milestone on the road to micro-power management and energy harvesting. A prominent feature of this IC is its ability to start up at a supply voltage as low as 330 mV typically, and 450 mV guaranteed. With an SMD inductor and a few capacitors and
DC-DC converter starts up and operates from a single photocell Read More »
Adding components from Ambiq Micro and Talent Highland, Fujitsu Electronics Europe has increased its Bluetooth Low Energy portfolio. The additional products offer customers high integration, low power consumption and flexibility, says Fujitsu Electronics Europe (FEE), and it has produced the ClickBeetle reference platform (pictured) to facilitate the integration of Bluetooth Low Energy products into applications.
Fujitsu Electronics Europe expands its Bluetooth Low Energy portfolio Read More »
Based upon Flex Power Modules’ Hybrid Regulated Ratio (HRR) topology, the BMR480 DC/DC bus converter module delivers up to 1000W and 96.2A peak power. The BMR480 DC/DC advanced bus converter targets high-end and high-power applications. It is available in an industry-standard and low-profile quarter-brick-format with dimensions of 58.4 x 36.8 x 12.19mm (2.30 x 1.45
Flex Power Modules launches 1000W DC/DC advanced bus converter Read More »
This small post shows how to start using PIC12F1822 DAC (Digital-to Analog Converter) module. PIC12F1822 microcontroller has 1 DAC module. The DAC can be used to supply analog voltage on RA0 pin with 32 selectable output levels. The input of the DAC can be connected to: External VREF pins VDD supply voltage FVR (Fixed Voltage
PIC12F1822 DAC Module Read More »
Features Wide Input Voltage Range: 4V to 36V Two Independent 1.6A/40V Synchronous Bucks I2C Interface for Internal True Color PWM™ Dimming (8192:1), Analog Dimming and Fault Reporting 1000:1 External True Color PWM Dimming and 10:1 External Analog Dimming PMOS Switch Driver for PWM and Output Disconnect ±3% Constant Current Regulation Adjustable Frequency: 200kHz to 2MHz Frequency Synchronization
LT3964 – Dual 36V Synchronous 1.6A Buck LED Driver with I2C Read More »
Features Wide Input Voltage Range: 2.8V to 60V Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA 2A, 60V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Programmable Frequency (300kHz to 2MHz) Synchronizable to an External Clock Spread Spectrum Frequency Modulation for Low EMI BIAS Pin for Higher Efficiency n
LT8362 – LOW IQ BOOST/SEPIC/INVERTING CONVERTER WITH 2A, 60V SWITCH Read More »
Description The TPS65262 is a monolithic triple synchronous step-down (buck) converter with 3-A/1-A/1-A output current. A wide 4.5- to 18-V input supply voltage range encompasses the most intermediate bus voltage operating off 5-, 9-, 12-, or 15-V power bus. The converter, with constant frequency peak current mode, is designed to simplify its application while giving
TPS65262 – Triple Synchronous Step-Down Converter with 200mA/100mA Dual LDOs Read More »
