Projects

Introducing PIC Microcontroller projects

Introducing PIC Microcontroller projects

PIC Microcontroller Development Tools History PIC microcontroller Development Board (Completed on 2006-10-28) The ultimate PIC Microcontroller development board. After years of programming PIC microcontroller, I have finally design my super development board to program PIC microcontroller firmware. The automatic programming mode select and the 40 bits LED light bar display have ease my programming process […]

digital spirit level

Build a digital spirit level using a SCA610 accelerometer using PIC16F684

A bubble or spirit level meter, like the DIY Digital Spirit, is a handy tool to find whether a surface is horizontal or vertical. It is often carried by civil engineers, mechanical engineers, surveyors, carpenters, and many other professionals whose work involves precise alignments of horizontal and vertical planes.. Original spirit levels had two banana-shaped […]

Music player built on microcontroller AT91SAM7S256 with ARM core

Music player built on microcontroller AT91SAM7S256 with ARM core

1. The player allows: playback wav files in stereo format, 22,500Hz freqfency, and 8 bits of resolution, display the song titles, display time of songs, the possibility of stopping (pause) and switch songs, the possibility of change volume (+, -), read data from the MMC memory card inserted in the slot, display current state on […]

Seven Segment Display Thermometer with PIC Microcontroller schematich

Seven Segment Display Thermometer with PIC Microcontroller

The seven segment display is one of the most popular numeric displays used in many microcontroller applications because it’s cheap, robust and reliable. The seven segments actually consists of 8 LED (Light Emitting Diode) and it’s come with various sizes suitable for various numeric display application such as digital clock, counter, thermometer, humidity, etc. On […]

Evaluation Board

PIC16F84 Evaluation Board

Introduction When I set, some time ago, about working with a PIC 16×84, I had immediately to face the problem to have a permanently and stably working circuit, without mounting the PIC on a prototype board every time. Searching on the net, I didn’t find anything really complete for a PIC 16F84 / 16C84; I […]

Microcontroller Controlled Metal Detector Projects

Microcontroller Controlled Metal Detector Projects

Result of displays in the form of two scales, which are estimated to judge the material goal.In addition, the screen is small scale level of response and the current supply voltage. PIC18F252 The program is intended for controller PIC18F252.The controller PIC16F873 (A) to this version can not be used. This is more demanding to resources […]

Gen 3.2 PCS Board Design Schemetic

Gen 3.2 PCS Board Design

Gen 3.2 General                           Microservers, Vexcel Microservers, Quick Reference, Data Acquisition, Middleware Components                   GPS, SBC Configuration                   Microserver, SBC, SD Card, Power Operation       […]

Q matic Circuit Application of PIC16F877 Microcontroller

Q-matic Circuit Application of PIC16F877 Microcontroller

In this article I used in banks and hospitals will give information about the Q-matic s. I’ve done a routing circuit board (main board) and consists of three separate teller. Routing PIC16F877 on board, if the teller did not use pic16f876 in each. Teller as the officer may increase, decrease or can be reset. Every […]

The Ultra QP An Ultrasound QSO Party Rig Fun Educational

The Ultra-QP An Ultrasound QSO Party Rig Fun & Educational!

Imagine veterans and potential radio licensees gathered in a classroom, seated side-by-side facing the front, headphones on and a key at hand – both plugged into their QSO Party Rigs they each built the previous week – exchanging code as directed by designated net control! They’re not just sending in a vacuum or listening to […]

PIC16F628 4 RGB LED PWM Controller

PIC16F628 4 RGB LED PWM Controller using pic microcontroller

I am a big fan of LEDs.  Bright, colorful, flashing LEDs.  So, given my affinity for LEDs, I decided to work on a controller that me and a few of my friends could use as an art project/passive information display.  I have posted videos from the first prototypes (here and here), but it has been […]