Summary of ORTUR LASER MASTER 2 PRO: HIGH PRECISION LASER ENGRAVER FOR THE ULTIMATE ENGRAVING EXPERIENCE
Laser Master 2 Pro is an upgraded high-precision, high-speed laser engraver by ORTUR, featuring an OLM-PRO-V10 motherboard, a 32-bit MCU with 24V circuit, 12-bit PWM for 0.08mm x 0.15mm accuracy, and a native USB CDC interface supporting up to 2,000,000 baud. Optimizations raise maximum engraving speed from 4000 mm/min to 10,000 mm/min, improving consistency and reducing command transmission delay; marketed for commercial, maker, and hobbyist use at an accessible price.
Parts used in the Laser Master 2 Pro:
- Laser module
- Controller
- Surface (workpiece)
- OLM-PRO-V10 motherboard
- 32-bit MCU
- 24V circuit
- 12-bit precision PWM control
- Native USB CDC interface
Laser engraving is a common practice of using lasers to engrave anything on an object like designs, photos, any form of data, etc. This drawing tool is now an increasingly adopted tool for small businesses, product designers, makers, as well as hobbyists. A laser engraver machine consists of three main parts: a laser, a controller, and a surface. The laser is the part that leaves a mark on the surface. The controller determines the direction, intensity, speed of movement, and spread of the laser beam aimed at the surface. The laser beam is highly focused and collimated and can remove the material from the surface very effectively and precisely.
Laser Master 2 Pro
For commercial use, many aspects affect the choice of a laser engraver, like engraving speed, accuracy, heat management, longevity, and most importantly, safety. Modern laser engravers are improving in all of these aspects of performance and safety. Contributing to this trend, ORTUR is officially launching Laser Master 2 Pro, an upgrade of Laser Master 2. It provides higher precision, higher engraving speed, and consistency. It is easy to use and can cover the requirements of medium or even higher levels of users at an accessible price.
It consists of an OLM-PRO-V10 motherboard and a 32-bit MCU +24V Circuit. With the help of a 12bit precision PWM control signal, it is as accurate as 0.08mm*0.15mm. Talking about the speed, the ORTUR team, through optimization, increased the maximum speed from 4000mm/min to 10000mm/min. As compared with the traditional USB to the serial port with only a 921,600 baud rate, the MCU native USB CDC interface supports a baud rate as high as 2,000,000, significantly reduce the delay caused by command transmission, shorten the engraving time. The Laser Master 2 pro is three times faster than the average engraver in the market.
Read more: ORTUR LASER MASTER 2 PRO: HIGH PRECISION LASER ENGRAVER FOR THE ULTIMATE ENGRAVING EXPERIENCE
- What components make up a laser engraver machine?
The article states a laser engraver consists of a laser, a controller, and a surface. - What motherboard does the Laser Master 2 Pro use?
It uses the OLM-PRO-V10 motherboard. - What MCU and power circuit does the Laser Master 2 Pro include?
It includes a 32-bit MCU and a 24V circuit. - How accurate is the Laser Master 2 Pro?
With 12-bit PWM control, it is as accurate as 0.08mm by 0.15mm. - What is the maximum engraving speed of the Laser Master 2 Pro?
The maximum speed is increased to 10,000 mm/min. - How does the Laser Master 2 Pro reduce command transmission delay?
The MCU native USB CDC interface supports a baud rate up to 2,000,000, significantly reducing delay compared to traditional USB-to-serial with 921,600 baud. - How much faster is the Laser Master 2 Pro compared to average engravers?
The article states Laser Master 2 Pro is three times faster than the average engraver on the market. - Who is the Laser Master 2 Pro intended for?
The article indicates it covers requirements for medium or higher level users, small businesses, product designers, makers, and hobbyists.
