Summary of 3X3X3 LED CUBE WITH PIC16F628 MICROCONTROLLER CIRCUIT
This article describes a custom 3x3x3 LED cube project utilizing a PIC16F628 microcontroller, distinguishing it from common 4x4x4 market versions. The cube consists of three layers with nine LEDs each, totaling 27 LEDs. The circuit includes a 7805 voltage regulator for 5V operation (requiring an 8V–12V input) and uses pressure contacts K1, K2, and K3 to connect the layers to the programmer.
Parts used in the 3x3x3 LED Cube:
- PIC16F628 microcontroller
- 27 LEDs arranged in 3 layers of 9
- 7805 5V regulator IC
- K1, K2, and K3 pressure circuit connectors
- Printed circuit board (PCB)
- Power supply (8V to 12V or pre-regulated 5V)
- Proteus ISIS and Ares software files
- Source code for animations
The market plenty of 4 x 4 x 4 led cube was made. I have made 3 x 3 x 3 led cube we also differ. Led cube in each layer is made up… Electronics Projects, 3x3x3 LED Cube with PIC16F628 microcontroller circuit”led projects, microchip projects, microcontroller projects, pic16f628 projects, “
The market plenty of 4 x 4 x 4 led cube was made. I have made 3 x 3 x 3 led cube we also differ. Led cube in each layer is made up of 3 × 3 cut into 3 layers 9 ledden and 27 LEDs.
Led Cube circuit software and new animations. Each floor minus the ends of the pressure circuit, K1, K2, and K3 connect the writer places. the first layer on a printed circuit board connected to the tip of the pressure circuit, K1, . Printed circuit board on the 7805 5V regulator IC there if you want to use this version of the circuit with the input voltage must be at least 8v 12 can be used if you have a 5v regulated supply already voltda if there is no need to use 7805. If you are interested in and the Led cube circuits is less with this project will be useful to start your experience.
Source: 3X3X3 LED CUBE WITH PIC16F628 MICROCONTROLLER CIRCUIT All the files necessary for the construction of the Led Cube (proteus isis, ares, and the source code) 3x3x3 LED Cube with PIC16F628 microcontroller circuit.rar
-
What distinguishes this project from others?
This project is a 3x3x3 LED cube, whereas the market is full of 4x4x4 cubes. -
How many LEDs are used in the cube?
The cube uses 27 LEDs, organized as 3 layers with 9 LEDs per layer. -
Which microcontroller is required for this circuit?
The project utilizes the PIC16F628 microcontroller. -
What is the function of K1, K2, and K3?
These components are pressure circuits that connect the writer places to the different layers. -
Can I use a 5V regulated supply instead of the 7805?
Yes, if you already have a 5V regulated supply, you do not need to use the 7805. -
What input voltage is needed if using the 7805 regulator?
The input voltage must be at least 8V up to 12V when using the 7805 version. -
Where can I find the source code and circuit files?
All necessary files including Proteus ISIS, Ares, and source code are available in the provided .rar file.
