DIY Internet connected smart humidifier




I worked on creating a Internet connected last week using my open source WiFi relay project as platform. We observe quite dry air at our house, I suspect this is due to the fact that we use fan coils for heating/cooling. Humidity levels at home are usually below the 30% mark, which poses a health risk along with uncomfortably dry air. I’ve found these interesting charts that got me convinced I need to do something:

DIY Internet connected smart humidifier

Low humidity helps spread virus/bacteria over air.

The comfortable zone for humans depends on the temperature, here is what it looks like for most of us:

We own a ultrasonic humidifier, but it has no setpoint, just on/off with intensity setting. Also, I’d like it to work only in certain times, not all of the time, so that called for using the WiFi thermostat scheduling function, only re-worked to take the humidity as to determine on/off state rather than temperature:

I realize there are homes with exact opposite problem, i.e. humidity is too high. For that reason I have a “Dry” function to use with  air drier as well so the relay will function using opposite logic i.e. activate when humidity is exceeded.

The project uses a DHT22 temperature sensor mounted to the side of the enclosure for better ventilation and reliable reading:

I threw in a ultra-cheap I2C OLED status display to get a visual reading. Milling the box so that the OLED shows was pretty nasty, hated it. I cut a piece of paper and placed it on top of the cover, below the transparent lid to cover up for the lousy milling job

For more detail: DIY Internet connected smart humidifier

READ  3D magnetic sensor from Infineon

JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w




Leave a Comment

*
= 3 + 0

Read previous post:
SERIAL STAR, A 4 IN 1 USB SERIAL AND I2C CONVERTER
SERIAL STAR, A 4 IN 1 USB SERIAL AND I2C CONVERTER

Hi all! Here’s one of the last board I design the last year. On 2016, I develop the Dual USB Serial...

Close
Scroll to top