This page will show you how to use the TD-CMP modules in a way which fits you most. Here are the technical specifications of the modules: Compass: Resolution: 1Ā° – Accuracy: 3Ā° Tilt/Roll: (TD-CMP02 and TD-CMP03 only) Resolution: 2Ā° – Accuracy: 5Ā° Temperature: (TD-CMP03 only) Resolution= 1Ā°C/F – Accuracy =1Ā° New: Sampling rate: 12,5 […]
Roll and Temperature sensor applications using PIC18F2550 Read More Ā»
The new PIC18F2550 Project Board was designed as the development platform for student projects. The board features MCU: PIC18F2550 with external xtal, ADC: one channel 0-2.5V sigma-delta converter, Linear Technology LTC2400/LTC2420, 6-channal 10-bit ADC 0-5V, Display: Two connectors for text LCD or GLCD, USB: onchip USB port with type B connector, Power supply: onboard low
pic18f2550 Microcontroller Project Board Read More Ā»
Temperature and relative humidity are two very important ambient parameters that are directly related to human comfort. Monitoring these factors becomes even more crucial in various applications such as environmental control systems and indoor climate management. Integrating sensors like the Sensirion SHT1x/SHT7x can provide precise measurements, ensuring optimal conditions for occupants while also enabling efficient
Daft Punk Table Replica Graphics Controller This instructable presents a graphics controller card for something like the Daft Punk Table Replica. This should be used in conjunction with a driver board (output expander) like this one, which will drive the high loads presented by the table. This is a work in progress and collaborations on
Daft Punk Table Replica Graphics Controller using PIC18f2550 Read More Ā»
Welcome to another chapter of PIC18F programming Tutorial. In this chapter we are going to program a simple 28 pin PIC18F2550 microcontroller using mplabx IDE and XC8 Compiler. The concepts for programming a pic18f2550 microcontroller is still going to be almost same as previous tutorials on pic18f4550 microcontroller, however since pic18f2550 is a different microcontroller
PIC18F2550 : Blink LED using XC8 Compiler Read More Ā»
The new PIC18F2550 Project Board was designed as the development platform for student projects. The board features MCU: PIC18F2550 with external xtal, ADC: one channel 0-2.5V sigma-delta converter, Linear Technology LTC2400/LTC2420, 6-channal 10-bit ADC 0-5V, Display: Two connectors for text LCD or GLCD, USB: onchip USB port with type B connector, Power supply: onboard low
PIC18F2550 Project Board using pic microcontroller Read More Ā»
USB Indoor/Outdoor Thermometer (or, ‘My first USB device’) This is a simple design that demonstrates the USB peripheral on the PIC 18Fs. There are a bunch of examples for the 18F4550 40 pin chips online, this design demonstrates the smaller 18F2550 28 pin version. The PCB uses surface mount parts, but all components are available
USB Indoor/Outdoor Thermometer using PIC18F2550 microcontroller Read More Ā»
