What is Nextion Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube. This solution […]
Nextion: a cost-effective high-performance TFT HMI Read More »
This Half-bridge driver based on IR2104 gate driver IC and N channel Dpak MOSFET , The IR2104 is a high voltage, high speed power MOSFET driver with independent high and low side referenced output channels. HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard COMOS or LSTTL
Half Bridge Driver based on IR2104 Read More »
Silicon Labs is producing ARM M0-based USB-enabled MCUs called Happy Gecko which aim to lower USB power drain and simplify USB connectivity. Adding USB interfaces to portable, battery-powered connected devices can double the application current consumption, says Silicon Labs. Happy Gecko USB MCUs have five energy modes enabling applications to remain in an energy-optimal state
Happy Gecko ARM M0-based USB MCUs from Si Labs Read More »
Many times, designers are faced with the need of generating analogue or analog voltage levels in purely digital circuits. Although the market provides today a very broad range of dedicated digital-to-analogue converters, putting such a device in the schematic has a negative impact on the overall cost of the system. 1. Introduction In the first
How-to use PWM to Generate Analog (or Analogue) Voltage in Digital Circuits Read More »
I have been working with Eagle for quite some time but never really got a PCB manufactured. almost all the time i used the toner transfer method to make homebrew PCBs. But then i took a project in which i had to use SMD components and i could no longer use toner transfer method because
Panelizing and Gerber Generation in Eagle Read More »
Sydney, Australia – May 18, 2015 – CAP-XX (LSE:CPX), developer of flat supercapacitors for burst and back-up power in space-constrained electronic devices, today launched its Thinline series of single-cell supercapacitors. The world’s thinnest at 0.6mm thick, and with prices starting at less than US$1 in large volumes, Thinline was developed to address the size, weight
Superthin Supercapacitors Read More »
This article explains how the LMC555 timer chip works, from the tiny transistors and resistors on the silicon chip, to the functional units such as comparators and current mirrors that make it work. The popular 555 timer integrated circuit is said to be the world’s best-selling integrated circuit with billions sold since it was designed
Reverse engineering the popular 555 timer chip (CMOS version) Read More »
Analog Devices has introduced a FET input AFE (analog front-end) with an integrated ADC driver designed to interface directly with current mode sensors such as photo diodes and highoutput impedance-voltage sensors. The ADA4350 integrates a FET input amplifier, switching network and ADC driver into a single package, which simplifies design and lowers power and PCB
ADI launches FET input analogue front end Read More »
Features Wide Input Voltage Range: 3.4V to 42V 2.5A and 1.5A Buck Regulators with Separate Inputs Fast Minimum Switch On-Time: 35ns Ultralow Quiescent Current Burst Mode® Operation: 6.5μA IQ Regulating 12VIN to 5VOUT and 3.3VOUT Output Ripple < 15mV 180° Out of Phase Switching Adjustable and Synchronizable: 200kHz to 3MHz Accurate 1V Enable Pin Thresholds
I’m currently mainly working on my new anemometer design but once in a while I get distracted. For example when my Keysight E3645A lab power supply was making so much noise that I could hardly concentrate. That’s when the idea of this fan controller was born.Of course, the best temperature controlled fan in the world doesn’t
Temperature Controlled Fan Read More »
Your one-stop destination for PIC microcontroller projects, tutorials, PDFs, software, tools and everything embedded. Built for students, hobbyists & engineers.
PIC Microcontroller has been helping students and engineers since 2008 by providing high quality PIC projects and resources. We are passionate about embedded systems and microcontroller development.
© 2008 – 2026 PIC Microcontroller. All Rights Reserved.