LT8331 – Low IQ Boost/SEPIC/ Flyback/Inverting Converter with 0.5A, 140V Switch




Description

The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very low output currents, while keeping typical output ripple below 20mV.

LT8331 - Low IQ Boost

The internally-compensated current mode architecture results in stable operation over a wide range of input and output voltages and programmable switching frequencies between 100kHz to 500kHz. A SYNC/MODE pin allows synchronization to an external clock. It can also be used to select between burst or pulse-skipping modes of operation. For increased efficiency, a BIAS pin can accept a second input to supply the INTVCC regulator. Additional features include frequency foldback and programmable soft-start for controlling inductor current during start-up.

The LT8331 is available in a thermally-enhanced MSOP package with four pins removed for high voltage spacings.

Applications

  • Industrial and Automotive
  • Telecom
  • Medical Diagnostic Equipment
  • Portable Electronics

People Who Viewed This Product Also Viewed

  • LT8471 – Dual Multitopology DC/DC Converters with 2A Switches and Synchronization
  • LT8705 – 80V VIN and VOUT Synchronous 4-Switch Buck- Boost DC/DC Controller
  • LT3758 – High Input Voltage, Boost, Flyback, SEPIC and Inverting Controller
  • LT4320/LT4320-1 – Ideal Diode Bridge Controller
  • LT3757 – Boost, Flyback, SEPIC and Inverting Controller
  • LTC4364 – Surge Stopper with Ideal Diode
  • LT8300 – 100VIN Micropower Isolated Flyback Converter with 150V/260mA Switch
  • LT4363 – High Voltage Surge Stopper with Current Limit
  • LT3748 – 100V Isolated Flyback Controller
  • LT3796/LT3796-1 – 100V Constant-Current and Constant-Voltage Controller with Dual Current Sense
READ  ESP8266 superfast flashing: flash ESP in 5 seconds

For more detail:  LT8331 – Low IQ Boost/SEPIC/ Flyback/Inverting Converter with 0.5A, 140V Switch




Leave a Comment

*
= 4 + 8

Read previous post:
MathWorks helps programme Altera SOCs

Altera is providing programming support for its ARM-based SoCs using industry-standard workflows from MathWorks. Release 2014b from MathWorks includes an automated,...

Close
Scroll to top