mobile

BROADCOMS BCM4389 CHIP WITH WI FI 6E TECHNOLOGY AND BLUETOOTH 5

BROADCOM’S BCM4389 CHIP WITH WI-FI 6E TECHNOLOGY AND BLUETOOTH 5

Broadcom’s BCM4389 chip is a client-side device supporting Wi-Fi 6E and Bluetooth 5 combo dedicated to mobile handset applications. The Wi-Fi 6E technology can operate on the 6 GHz band with 160MHz wide channels which is a progressive version of the Wi-Fi 6 technology. Hence, it enables speeds over 2 Gbps for faster communications than the Wi-Fi 6 that supports from 2.4GHz to 5GHz radio bands. […]

BROADCOM’S BCM4389 CHIP WITH WI-FI 6E TECHNOLOGY AND BLUETOOTH 5 Read More »

B58621V MEDICAL SENSORS MAKE MEASUREMENTS IN THE FLOW LINES

B58621V MEDICAL SENSORS MAKE MEASUREMENTS IN THE FLOW LINES

EPCOS’ medical sensors precise measurements in the flow lines allow flow rates to be calculated accurately in ventilator equipment TDK Corporation’s B58621V range of highly accurate differential pressure sensors, are designed as printed circuit boards. The sensors are designed for measurement ranges of 16 mbar full-scale (FS), 100 mbar FS and 7 bar FS, with an absolute accuracy of

B58621V MEDICAL SENSORS MAKE MEASUREMENTS IN THE FLOW LINES Read More »

Design and Development of an Automated Home Control System Using Mobile Phone Schematic

Design and Development of an Automated Home Control System Using Mobile Phone

Abstract This paper presents design and development of an Automated Home Control System (AHCS) using mobile phone. A cell (mobile) phone acts as a modem for the control of electrical home appliances. This is achieved when the mobile phone number is dialed and an appropriate command button is pressed. The paper demonstrates how to develop

Design and Development of an Automated Home Control System Using Mobile Phone Read More »

MOUSER ELECTRONICS NOW OFFERING FULL UWB FORMERLY DECAWAVE PORTFOLIO FROM QORVO

MOUSER ELECTRONICS NOW OFFERING FULL UWB (FORMERLY DECAWAVE) PORTFOLIO FROM QORVO

Mouser Electronics, Inc., an authorised global distributor of Qorvo products, is pleased to announce that Qorvo’s complete line of ultra-wideband (UWB) technology products — formerly Decawave — is now available to order on the Mouser website. Qorvo’s UWB product portfolio includes pioneering Impulse Radio UWB technology, which allows for centimetre accuracy distance/location measurement and secure

MOUSER ELECTRONICS NOW OFFERING FULL UWB (FORMERLY DECAWAVE) PORTFOLIO FROM QORVO Read More »

E CON SYSTEMS LAUNCHES IP67 RUGGED GMSL2 CAMERA AND CAMERA KIT POWERED BY NVIDIA JETSON EDGE AI PLATFORM

E-CON SYSTEMS LAUNCHES IP67 RUGGED GMSL2 CAMERA AND CAMERA KIT POWERED BY NVIDIA JETSON EDGE AI PLATFORM

Industrial grade | 15 meters cable support | Full HD with built-in HDR | GMSL2 | deserializer interface board for NVIDIA Jetson AGX Xavier Developer Kit San Jose and Chennai (Sep 1, 2020): e-con Systems Inc., a leading embedded camera solutions company,  today announced the launch of its STURDeCAM20 industrial grade GMSL camera and STURDeCAM20_CUXVR camera kit leveraging the

E-CON SYSTEMS LAUNCHES IP67 RUGGED GMSL2 CAMERA AND CAMERA KIT POWERED BY NVIDIA JETSON EDGE AI PLATFORM Read More »

Android Control of Non Arduino Based Micros PIC Etc

Android Control of Non-Arduino Based Micros, PIC Etc

This instructable describes how to use the free pfodDesignerV2 to create menus and charts for your non-Arduino based micro project. These menus and charts are then displayed by pfodApp on your Android mobile. No Android programming required. Half-Duplex operation is supported if your hardware/software does not support Full-Duplex. These instructions are also available at pfod™ for Non-Arduino based microprocessors If you

Android Control of Non-Arduino Based Micros, PIC Etc Read More »

E CON SYSTEMS LAUNCHES 5MP CAMERA FOR NVIDIA® JETSON XAVIER NX™ DEVELOPER KIT

E-CON SYSTEMS LAUNCHES 5MP CAMERA FOR NVIDIA® JETSON XAVIER NX™ DEVELOPER KIT

July 15, 2020: e-con Systems Inc., a leading embedded camera solution company, today announced the launch of 5MP camera support for NVIDIA® Jetson Xavier NX™ Developer Kit. The e-CAM50_CUNX is based on 1/ 2.5-inch AR0521, a 5 MP CMOS image sensor from ON Semiconductor. e-CAM50_CUNX is based on 1/ 2.5’ AR0521 image sensor with an

E-CON SYSTEMS LAUNCHES 5MP CAMERA FOR NVIDIA® JETSON XAVIER NX™ DEVELOPER KIT Read More »