connector | Battery Guide

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD

A few months ago, in November 2018, we talked about the possibility of combining both WiFi 5 and Bluetooth 5 into one board. The UNISOC UWP5661 was a chip that could make that possible and the same chip powers the IVY5661 96Boards IoT board. At the time of posting about the IVY5661 board and the relatively unknown WiSoC chip little information was available. The product board […]

THE WIFI 5 AND BLUETOOTH 5 BOARD NOW AVAILABLE – IVY5661 IOT BOARD Read More »

PAC1934 – MICROCHIP’S NEW POWER-MONITORING IC MEASURES POWER WITH 99% ACCURACY

Microchip recently developed a precision power-and-energy-monitoring chip – PAC1934. The PAC1934 is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high-resolution ADC. It works in conjunction with a Microchip software driver that is fully compatible with the Energy Estimation Engine (E3) built into the Windows 10 operating system. The whole setup provides 99 percent

PAC1934 – MICROCHIP’S NEW POWER-MONITORING IC MEASURES POWER WITH 99% ACCURACY Read More »

BANANA PI M2 MAGIC, SMALLEST BANANA PI BOARD

Sinovoip had announced its new board Banana Pi M2 Magic. At first, it is an ARM SoC development board that features a high computing performance in a 51mm square portable design. In addition to onboard WiFi and Bluetooth, M2 Magic offers 8GB eMMc storage and DDR3 SDRAM of 512 MB. There is also an SD card slot for

BANANA PI M2 MAGIC, SMALLEST BANANA PI BOARD Read More »

72 CHANNELS SERIAL TO PARALLEL DRIVER BOARD USING 74HC595 & ULN2803

72 channels Serial (SPI) to parallel driver board has been designed for various applications. This project can be used as multi Solenoid driver, large size 7 segment display driver, bar graph driver, and LED driver. The project works with 5V logic levels. Output load supply 12V-48V DC and each output can drive 500mA load. I

72 CHANNELS SERIAL TO PARALLEL DRIVER BOARD USING 74HC595 & ULN2803 Read More »

Three RK3399 open-spec SBCs launched including AI capability Model

Three open-spec SBCs have been launched on Indiegogo. They are the RK3399-based Khadas Edge SBC, a new Edge-1S model that uses the AI-enhanced RK3399Pro SoC and an Edge-V model that replaces the Edge’s MXM3 connector with 40-pin GPIO and adds MIPI-DSI and -CSI. Shenzhen Wesion’s Khadas project exhibited the Khadas Edge SBC in July, which

Three RK3399 open-spec SBCs launched including AI capability Model Read More »

Hardkernel ODROID-H2 with Intel Celeron J4105 To Launch soon

Hardkernel started working on an ODROID x86 board since last year, and the board was slated to launch later in 2017 according to the CEO in an interview published in ODROID magazine. After several repetitions, procedures, and processors considerations, the ODROID-H2 is set to become available by November as the first ODROID x86 board. The

Hardkernel ODROID-H2 with Intel Celeron J4105 To Launch soon Read More »

SAMTEC RELEASES OVER 100,000 NEW MODELS ON SNAPEDA

Electronics designers can boost their productivity with free symbols & footprints for Samtec products Samtec is releasing new digital models for over 100,000 of its products on SnapEDA, the industry-leading circuit board design library. Traditionally, designers have spent days creating digital models – such as symbols and footprints – for each component in their designs. Connectors are

SAMTEC RELEASES OVER 100,000 NEW MODELS ON SNAPEDA Read More »

NanoPC-T4 – A High-Performance Low Cost Single Board Computer Powered By RK3399

FriendlyElec recently released a pretty exciting hacker board which is super cheap, considering the features of the board and the price it is being sold for. The Single Board Computer (SBC) is based on Rockchip RK3399; a low power, high-performance processor. The board which is called Nano PC – T4 can be regarded as the

NanoPC-T4 – A High-Performance Low Cost Single Board Computer Powered By RK3399 Read More »

UP AI Edge – an edge platform works across Intel CPU, GPU, VPU and FPGA

UP Bridge the Gap – a brand of AAEON Europe – is proud to bring its latest innovation at Kicksarter. Introducing UP AI Edge: an x86 computing platform works across Intel CPU, GPU,VPU and FPGA to enable Artificial Intelligence on the Edge. Most IT solutions available today are focused on connecting Edge devices to the

UP AI Edge – an edge platform works across Intel CPU, GPU, VPU and FPGA Read More »

Remote controlled USB mouse using PIC18F4550

Building a USB mouse using PIC18F4550 microcontroller and CCS C compiler is easy as shown in the link below: USB Mouse using PIC18F4550 microcontroller Also, it is not hard to add an infrared remote control to the previous USB project. This post shows how did I build a simple IR remote controlled USB mouse using

Remote controlled USB mouse using PIC18F4550 Read More »