News & Updates

ANALOG DEVICES INC. LTC3337 PRIMARY BATTERY STATE OF HEALTH MONITOR

Analog Devices Inc. LTC3337 Primary Battery State of Health (SOH) Monitor provides accurate, real-time readings of battery cell discharge, voltage, impedance, and temperature. The LTC3337 is designed to be placed in series with a primary battery with minimal associated series voltage drop. This device integrates an infinite dynamic range coulomb counter that tallies all accumulated battery discharge and stores it […]

ANALOG DEVICES INC. LTC3337 PRIMARY BATTERY STATE OF HEALTH MONITOR Read More »

CIRCUIT PROVIDES REVERSE-BATTERY CONNECTION PROTECTION

A universal problem in battery-operated devices is the threat of damage when an end-user (never an engineer) inserts the battery backward. You can avoid damage by inserting a single diode or by using a diode-bridge configuration, but those fixes waste power and reduce the supply voltage by adding one or two diode drops between the

CIRCUIT PROVIDES REVERSE-BATTERY CONNECTION PROTECTION Read More »

STDRIVEG600 GATE DRIVER FOR GAN TRANSISTORS

STMicroelectronics’ single-chip half-bridge gate driver is designed for enhancement mode GaN FETs or N-channel power MOSFETs STMicroelectronics’ STDRIVEG600 is a single-chip half-bridge gate driver for enhancement mode GaN FETs or N-channel power MOSFETs. The high-side section is designed to stand a voltage up to 600 V. It is suitable for applications with bus voltage up to 500 V. The STDRIVEG600

STDRIVEG600 GATE DRIVER FOR GAN TRANSISTORS Read More »

INFINEON TECHNOLOGIES XENSIV™ PAS CO2 SENSOR

Increasingly efficient building insulation can help to mitigate the effects of climate change, but heavily insulated buildings are not always good for human health. Poor ventilation can result in lower oxygen levels and a build-up of carbon dioxide (CO2). Even moderate levels of CO2 can have a negative impact on health and productivity. Already at 1000

INFINEON TECHNOLOGIES XENSIV™ PAS CO2 SENSOR Read More »

MICROCHIP INTRODUCES HIGH-SPEED MODE I2C SERIAL EEPROM WITH 128-BIT SERIAL NUMBER

Microchip Technology has released 24CS512, the first commercially available I2C Serial EEPROM with support for 3.4 Mbit/s data rates. This high-speed I2C EEPROM is 3 to 4 times faster than the existing EEPROMs available in the market. It offers high-speed mode operation, software write-protection and factory programmed serial numbers. The 24CS512 I2C Serial EEPROM provides 512 Kbits of Serial EEPROM, utilizing an I2C

MICROCHIP INTRODUCES HIGH-SPEED MODE I2C SERIAL EEPROM WITH 128-BIT SERIAL NUMBER Read More »

CONTROLLING A LED WITH ESP32-C3-DEVKITM-1 DEVELOPMENT BOARD USING ESP-IDF

In this article, we will explore another onboard functionality of Espressif’s ESP32-C3-DevKITM-1 which is the onboard RGB LED. With its powerful connectivity, compact size at such a low cost the ESP32-C3- DevKit M-1 board is a must-try for your next IoT project. You can read the official documentation of the development board as well. The board features an onboard addressable RGB

CONTROLLING A LED WITH ESP32-C3-DEVKITM-1 DEVELOPMENT BOARD USING ESP-IDF Read More »

IBR215 2.5″ SINGLE BOARD COMPUTER POWERED BY NXP I.MX 8M PLUS

IBASE Technology Inc., a world leading provider of embedded computing systems is pleased to launch the IBR215 2.5-inch single-board computer powered by NXP’s quad-core 1.6GHz ARM Cortex®-A53 i.MX 8M Plus processor. Measuring 105 x 72 mm in a compact footprint, the SBC offers impressive computing performance, advanced multimedia, flexible connectivity and a variety of interfaces, making it

IBR215 2.5″ SINGLE BOARD COMPUTER POWERED BY NXP I.MX 8M PLUS Read More »

FWS-2280: FLEXIBILITY, SECURITY AND CONNECTIVITY IN A COMPACT DESKTOP SOLUTION

The FWS-2280 is a powerful, compact white box solution for network applications such as SD-WAN and UTM, powered by the Intel® Atom™ x6000E series processors. AAEON, a leader in uCPE white box solutions, announces the FWS-2280 desktop network appliance. Powered by the Intel® Atom x6000E, Celeron® and Pentium® N and J series processors (formerly Elkhart Lake), the

FWS-2280: FLEXIBILITY, SECURITY AND CONNECTIVITY IN A COMPACT DESKTOP SOLUTION Read More »

M5STACK’S NEW COST-EFFECTIVE ‘PLUG-AND-PLAY’ ESP32 MINIATURE MODULE – STAMP PICO

STAMP PICO features an ultra-compact design with two low-power Xtensa® 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. It is ideal for any space-constrained or battery-powered devices such as wearables, home automation, smart sensors, and other IoT devices. MULTIPLE STYLE: 5 options of installation, means endless possibilities! (SMT, DIP, flywire, Grove interface), with

M5STACK’S NEW COST-EFFECTIVE ‘PLUG-AND-PLAY’ ESP32 MINIATURE MODULE – STAMP PICO Read More »

RADXA UNVEILS ROCK 3 MODEL B SBC BASED ON PICO-ITX

Radxa has announced a Rock 3 Model B SBC, which features the same RK3568 as the Rock 3A, and additionally features WiFi/BT, a second GbE port, native SATA, and M.2 B-key and SIM slots for 4G/5G instead of E-key. The Model B enables native SATA and dual GbE ports, offering enhanced support for NAS and networking applications. The Rock 3 Model B is

RADXA UNVEILS ROCK 3 MODEL B SBC BASED ON PICO-ITX Read More »

	GPS Projects
	Internet and LAN Projects
	Interfacing(USB) Projects
	Metering & Instrument Projects
	Sensor – Detector Projects
	Motor Based Projects
	Phone Based Projects
	Robotics and Automation Projects
	Camera – Imaging and Video Projects
	Game and Entertainment Projects
	Home Automation Based Projects
	Memory and Storage Projects
	RFID Based Projects
	Security and Safety Projects
	Sound and Audio Projects
	Temperature Measurement Based Projects
	DIY Projects
	Medical and Health based Projects
	Battery Based Projects
	PWM (Pulse-width modulation) Projects
	Radio Based Projects
	Others Project
	Calculator Based Projects
	Car - Auto Projects
	LCD Based Projects
	LED Based Projects
	Clock and Timer Projects
	CNC-Machines Projects
	Development Board Projects
	RTOS Projects