News & Updates

GALVANIC ISOLATED 8 CHANNEL HIGH-SIDE SWITCH (0.6A PER CHANNEL)

This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface also supports direct control mode and is designed to operate with 3.3/5V CMOS compatible levels. The […]

GALVANIC ISOLATED 8 CHANNEL HIGH-SIDE SWITCH (0.6A PER CHANNEL) Read More »

WXR3031 rework station will replace you three devices

Soldering, deslodering, hot-air works but also a record of your work in a PC – this is the Weller WXR 3031. Good soldering station is usually a fundament of a workplace. Desoldering station is usually a necessity if you work in development or service. And a hot-air station? – this one is becoming a must

WXR3031 rework station will replace you three devices Read More »

RUNMECY, A COMPACT LASER ENGRAVER AND CUTTER

The Runmecy is at the forefront of laser engraving technology. Its powerful laser is built to help you unleash your creativity on any surface, with a 5W German-engineered OSRAM laser chip, efficient heat dissipation, and finely tuned precision glass lens. The Runmecy can now cut through thick wood thanks to our advancements (up to 1.5mm). It ensures that every

RUNMECY, A COMPACT LASER ENGRAVER AND CUTTER Read More »

New power inverter could make EVs more powerful and efficient

A new power inverter developed at the Oak Ridge National Laboratory (ORNL) marries advances in 3D printing and wide-band semiconductor technology to deliver significantly improved performance in a smaller, lighter package. With further development, it could go a long way toward helping build electric cars that are more powerful and energy-efficient. Power inverters are an

New power inverter could make EVs more powerful and efficient Read More »

AAEON ANNOUNCES NEW UPCOMING PLATFORMS POWERED BY NVIDIA JETSON EDGE AI PLATFORM; PRESENTING SIX SESSIONS AT GTC 2021

AAEON, an industry leader in embedded AI edge computing systems, announces a lineup of platforms currently under development powered by the newly released NVIDIA® Jetson™ TX2 NX system on module (SOM). This range of systems, named the BOXER-823x Series, will augment AAEON’s lineup of diverse solutions powered by the NVIDIA Jetson edge AI platform. With these platforms planned

AAEON ANNOUNCES NEW UPCOMING PLATFORMS POWERED BY NVIDIA JETSON EDGE AI PLATFORM; PRESENTING SIX SESSIONS AT GTC 2021 Read More »

Terahertz Optical Transistors Beat Silicon

PORTLAND, Ore.–Purdue University researchers have demonstrated a CMOS-compatible all-optical transistor capable of 4THz speeds, potentially over a 1000 times faster than silicon transistors. Nano-photonic transistors processed at low-temperatures can be fabricated atop complementary metal oxide semiconductors (CMOS) to boost switching time by ~5,000-times less than 300 femtoseconds (fs) or almost 4 terahertz (THz), according to

Terahertz Optical Transistors Beat Silicon Read More »

WinHeist – An Electronic Components Organizer for Every Hobbyist

WinHeist Windows Hobbyist Electronic Inventory SysTem WinHeist is an electronics component organizer that was developed by a programmer with an electronic habit. It has developed over the years from a personal application used by the author into the full blown application that it is today. To get a look at WinHeist and get an idea

WinHeist – An Electronic Components Organizer for Every Hobbyist Read More »

MAXIM INTEGRATED MAX78000 AI MICROCONTROLLER

MAX78000 – Ultra-low-power Arm Cortex-M4 processor with FPU-based microcontroller with Convolutional Neural Network Accelerator. The MAX78000 is is an advanced system-on-chip built to enable neural networks to execute at ultra-low power and live at the edge of the IoT. This product combines the most energy-efficient AI processing with Maxim’s proven ultra-low power microcontrollers. The hardware-based convolutional neural

MAXIM INTEGRATED MAX78000 AI MICROCONTROLLER Read More »

µ-Wire – USB on an ATtiny 10

Atmels AVR ATtiny10 are surprisingly powerful devices that come in an extremely tiny SOT23 package with only 6 pins. The have 1kb of flash, 32 bytes of SRAM and use the reduced AVR core which only supports 16 instead of 32 register. It seems like Atmels idea of these devices is to use them as

µ-Wire – USB on an ATtiny 10 Read More »

RENESAS RELEASES RX23W MODULE WITH BLUETOOTH FOR SYSTEM CONTROL AND WIRELESS COMMUNICATION ON IOT DEVICES

Renesas Electronics today introduced the RX23W Module with full Bluetooth® 5.0 Low Energy support for system control and wireless communication on IoT endpoint devices. Featuring the RX23W 32-bit RX MCU supporting fully integrated Bluetooth Low Energy communication, the new RX23W module is equipped with an antenna, oscillator and custom-matched circuit. The new module is certified under Radio Law for multiple countries,

RENESAS RELEASES RX23W MODULE WITH BLUETOOTH FOR SYSTEM CONTROL AND WIRELESS COMMUNICATION ON IOT DEVICES Read More »

	GPS Projects
	Internet and LAN Projects
	Interfacing(USB) Projects
	Metering & Instrument Projects
	Sensor – Detector Projects
	Motor Based Projects
	Phone Based Projects
	Robotics and Automation Projects
	Camera – Imaging and Video Projects
	Game and Entertainment Projects
	Home Automation Based Projects
	Memory and Storage Projects
	RFID Based Projects
	Security and Safety Projects
	Sound and Audio Projects
	Temperature Measurement Based Projects
	DIY Projects
	Medical and Health based Projects
	Battery Based Projects
	PWM (Pulse-width modulation) Projects
	Radio Based Projects
	Others Project
	Calculator Based Projects
	Car - Auto Projects
	LCD Based Projects
	LED Based Projects
	Clock and Timer Projects
	CNC-Machines Projects
	Development Board Projects
	RTOS Projects