Mini – Table Saw / Router / Shaper for Dremel rotary tool. Now that the Dremel contest voting is over I guess it’s ok to update this instructable. Here is a “supplement” video showing the table saw extension in action. 🙂 am attaching a PDF that includes the templates I made for this project. Open […]
Mini-Tablesaw / Router / Shaper for Dremel rotary tool Read More »
MAGIC PIXEL Magic Pixel is a universal and handy Bluetooth LED display, which we’ve been developing with focus on ease of use and effectivity. It can be used for displaying advertisement, information or just for fun. Magic Pixel is an ideal solution where effective and dynamic visualization of information is required. With its thin profile
MAGIC PIXEL – Bluetooth full color LED display Read More »
The module has been designed around LMD18200 from Texas Instruments. The LMD18200 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. Ideal for driving DC and stepper motors; the LMD18200 accommodates
LMD18200 H-Bridge Module for DC Motor Read More »
Desription ROHM’s USB Audio Decoder ICs integrate a USB 2.0 host, SD memory card controller, AAC decoder, WMA decoder, MP3 decoder, Audio DAC amp, and a system controller all on a single chip, allowing easy playback of music stored in USB flash memory using an audio player. They can be easily added to virtually any
Rohm has single chip USB audio decoder Read More »
s suitable many for simple, mini projects. I attached speaker to Timer14 PWM output (Pin PA6) and LED (or optocoupler connected to PTT) to GPIO pin PA0: The provided software is based on USB Virtual Com Port (VCP) device. The setup is done with command line interface using terminal from any PC. The setup is
Programmable CW Morse Keyer / beacon Read More »
Altera’s SoC FPGAs are now supported by Mentor’s Vista virtual software platforms for embedded software development. Vista can be downloaded from Mentor’s site. The Mentor Graphics Vista SoC virtual platforms are pre-built, fully functional simulation models of the ARM processor subsystems featured in each of Altera’s 28nm, 20nm, and 14nm SoC FPGA families. Software developers
Mentor’s Vista supports Altera SoC FPGAs Read More »
This instructable describes the design of function generator based on the Maxims’s Analog integrated circuit MAX038. The function generator is very useful tool for the electronics freaks. It is needed for tuning resonance circuits, testing audio and video equipment, designing of analog filters and for many other different purposes. Today there are two main types
Function generator Read More »
Welcome to usbpicprog, an open source Microchip PIC programmer for the USB port. As the therm “open source” implies, the hardware design, the software and the firmware are all available for download free of charge. Usbpicprog is an USB in circuit programmer for Microchip PIC processors. The hardware is as simple as possible, the current
usbpicprog a free and open source usb pic programmer Read More »
This page serves as a directory of all my posts related to my Arduino based Ultrasonic Anemometer. Posts Part 1: http://soldernerd.wordpress.com/2014/11/14/arduino-ultrasonic-anemometer-part-1-getting-started/ Part 2: http://soldernerd.wordpress.com/2014/11/15/arduino-ultrasonic-anemometer-part-2-digital-circuit/ Part 3: http://soldernerd.wordpress.com/2014/11/16/arduino-ultrasonic-anemometer-part-3-analog-circuit/ Part 4: http://soldernerd.wordpress.com/2014/11/16/arduino-ultrasonic-anemometer-part-4-testing-the-analog-board/ Part 5: http://soldernerd.wordpress.com/2014/11/18/arduino-ultrasonic-anemometer-part-5-testing-the-digital-board/ Part 6: http://soldernerd.wordpress.com/2014/11/19/arduino-ultrasonic-anemometer-part-6-mechanical-design/ Part 7: http://soldernerd.com/2014/11/21/arduino-ultrasonic-anemometer-part-7-basic-software/ Part 8: http://soldernerd.com/2014/11/23/arduino-ultrasonic-anemometer-part-8-more-software/ Part 9: http://soldernerd.com/2014/11/25/arduino-ultrasonic-anemometer-part-9-a-new-hardware/ Part 10: http://soldernerd.com/2014/11/28/arduino-ultrasonic-anemometer-part-10-arduino-shield-ready/ Part 11: http://soldernerd.com/2014/11/30/arduino-ultrasonic-anemometer-part-11-testing-the-new-hardware/ Part 12: http://soldernerd.com/2014/12/04/arduino-ultrasonic-anemometer-part-12-working-on-an-arduino-library/ Downloads: All Eagle
Arduino Ultrasonic Anemometer Read More »
CHANDLER, Ariz., Feb. 15, 2016 — Microchip Technology Inc. (NASDAQ: MCHP), a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions, today announced its MPLAB® Xpress Cloud-based Integrated Development Environment (IDE). This online development platform is the easiest way to get started with PIC® microcontrollers (MCUs), with zero downloads, sign-in or setup needed to start designing.
Microchip Launches Free, Cloud-based Development Platform Read More »
Your one-stop destination for PIC microcontroller projects, tutorials, PDFs, software, tools and everything embedded. Built for students, hobbyists & engineers.
PIC Microcontroller has been helping students and engineers since 2008 by providing high quality PIC projects and resources. We are passionate about embedded systems and microcontroller development.
© 2008 – 2026 PIC Microcontroller. All Rights Reserved.