100 V Forward Voltage Controller




The LT®8310 is a resonant-reset forward converter controller that drives an external low side N-channel MOSFET from an internally regulated 10V supply. The LT8310 features duty mode control to generate a stable, regulated, isolated output using a single power transformer. With the addition of output voltage feedback, via opto-coupler (isolated) or directly wired (nonisolated), current mode regulation is activated, improving output accuracy and load response. A choice of transformer turns ratio makes high step-down or step-up ratios possible without operating at duty cycle extremes.

100 V Forward Voltage Controller

The switching frequency is programmable from 100 kHz to 500 kHz to optimize efficiency, performance or external component size. A synchronous output is available for controlling secondary side synchronous rectification to improve efficiency. User programmable protection features include monitors on input voltage (UVLO and OVLO) and switch current (overcurrent limit). A soft-start feature helps prevent transformer flux saturation.

 

For more detail: 100 V Forward Voltage Controller




Leave a Comment

*
= 4 + 5

Read previous post:
Schematic design with the PIC16F84A microcontroller

Many circuits on the Internet are built with a CD4017 counter IC. I myself chose to use a microcontroller for...

Close
Scroll to top