MYIR introduces an Linux-ready industry-oriented MYC-C335X-GW CPU Module powered by TI’s AM335x ARM Cortex-A8 processor (800MHz AM3354 by default) which features PowerVR™ SGX530 for 2D and 3D graphics acceleration. Measuring only 50mm by 40mm, the MYC-C335X-GW is the fourth AM335x CPU Module designed by MYIR especially for gateway applications. It integrates a DDR3L RAM memory, a Nand Flash or an eMMC Flash, EEPROM and PMIC. […]
F&S Elektronik Systeme GmbH presents a prototype of a direct solder module. It’a a 30 x 30mm “OSM-MX8MM” module that runs Linux on an i.MX8M Mini. As part of the SGET, the standardization group SDT.05 was founded jointly by iesy GmbH, F&S Elektronik Systeme GmbH and Kontron AG. The aim of this group is a new standard
OSM (OPEN STANDARD MODULE) WITH NXP I.MX 8M MINI / NANO CPU Read More »
COM modules with NXP i.MX 8M Nano CPU High performance in a compact format Based on the NXP® i.MX 8M Nano applications processor, F&S Elektronik Systeme has developed an inexpensive CPU module (35x40mm) with many industrial interfaces and extensive software support. The heterogeneous multi-core processor consists of up to four Arm® Cortex®-A53 cores (1.5GHz) and an
STM8 delay implementation of delay_us and delay_ms in Cosmic-C inline assembly. All delay done using inline macro _delay. Register X used as cycle counter, number of cycles per microsecond calculated by US and MS macros (decrement/branch lasts 3 CPU… Electronics Projects, STM8-bit BCD Cycle Delay and 1 Wire Library “arm project, microcontroller projects, STM8 delay implementation of delay_us and
NoPC is an creation bleach for dynamical a VGA lizard without a PC. This single group is soigne yet retarded. A CPU muck is used to run a VGA protector, a keyboard, and a mouse, with ample module for… Electronics Projects, LPC2138 arm microcontroller generates vga signals “arm project, microcontroller projects, NoPC is an creation bleach for dynamical
LPC2138 ARM MICROCONTROLLER GENERATES VGA SIGNALS Read More »
The M100PFS is based on the PolarFire SoC FPGA architecture by Microsemi and combines high-performance 64-bit RISC-V cores with outstanding FPGA technology. The platform integrates a hardened real-time, Linux capable, RISC-V-based MPU subsystem on the mid-range PolarFire FPGA family, bringing low power consumption, thermal efficiency and defence grade security to embedded systems. The RISC-V CPU
NEXCOM has launched Neu-X300, a high performance fanless computer, powered with 8th Generation Intel® Core™ i-series processors. With its 190mm x 200mm x 54.4mm size, the modern-looking Neu-X300 uses a TPM2.0 IC to enhance cyber security. By specifically choosing an i5 or i7 processor, Neu-X300 is further equipped with vPRO remote management capability. And with its versatile I/O interface
NEU-X300 – EDGE COMPUTING SYSTEM POWERED BY 8TH GENERATION INTEL® CORE™ PROCESSOR Read More »
MYIR, the Shenzhen based electronics manufacturers recently announced the launch of a new product called the MYC-YA157C, which is a CPU Module based on the STM32MP1 dual-core microprocessor that features the Arm Cortex-A7 running at 650MHz alongside a Cortex-M4 core operating at 209MHz. Measuring 45mm x 43mm, the MYC-YA157C CPU Module is a compact System-on-Module (SoM) that combines the STM32MP157 processor
MYIR LAUNCHES STM32P1 BASED MYC-YA157C CPU MODULE Read More »
MYIR introduces a cost-effective MYC-YA157C CPU Module powered by ST’s STM32MP1 microprocessor which features dual-core Arm Cortex-A7 operating at up to 650MHz and an embedded Cortex-M4 core operating at up to 209MHz. The module is ready to run Linux OS and targets a wide variety of applications like industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require
MYIR INTRODUCES $29 ARM SOM POWERED BY ST STM32MP1 Read More »
SEGGER just released Ozone V3.10, a major update to its full-featured graphical debugger and performance analyzer. The new release includes support for custom instructions, allowing disassembly of application-specific instructions added to the CPU core to tailor it for the particular application. Custom instructions are defined in plug-in scripts, which can be easily edited by the user of Ozone or
SEGGER’S OZONE DEBUGGER ADDS SUPPORT FOR CUSTOM INSTRUCTIONS Read More »
