Summary of PIC16F877 WITH BOTTLE FILLING SYSTEM
This article describes a student project involving an automated bottle filling machine controlled by a PIC16F877 microcontroller. The system uses a conveyor belt to transport bottles, sensors to detect positioning and water levels, and a pump for filling. An LCD display provides status updates like "GETTING A NEW BOTTLE" or "FILLING." The mechanical setup includes a geared motor, a plastic-coated fabric tape, and a wiper pump connected via hose.
Parts used in the Bottle Filling System:
- PIC16F877 microcontroller
- 2x16 LCD display
- Conveyor belt with plastic coated fabric tape
- Geared motor (slow and powerful)
- Sensors for bottle detection and water level
- Wiper pump and hose
- Box or wooden seat for mounting
- PCB drawings
In this article, and a student friend, talk about his work with a bottle filling machine from the block schema system easier. Block diagram of bottle filling machine; 1: Tape engine starts to spin…. Electronics Projects,Pic16f877 With Bottle Filling System “microchip projects, microcontroller projects, pic16f877 projects, picbasic pro examples, “
In this article, and a student friend, talk about his work with a bottle filling machine from the block schema system easier.
1: Tape engine starts to spin. “GETTING a NEW BOTTLE” author
2: Sensor detects when the motor stops the bottle. The screen is GETTING READY to BE FILLED. ” For half a second.
3: Motor water bottle. Author of “DOLOYOR” on the screen. The other sensor detects the water level enough. The Motor stops on the “FILLING”. Filling the counter increases by 1.
4: wait for 2 seconds, then starts all over again the bottle Filled. “GETTING a NEW BOTTLE,” writes the engine works
One of the cylinder you can see one of the mechanics had fixed. Swivel part geared to a slow and powerful want to strap the engine rotating gear with fasten.
Mechanical tape any appropriate box or wooden seat, or even your own to make a system that can be mounted on the engine box.
These cylinders have a plastic coated fabrics such as, canvas or banner cloth, such as a fence with miller turns this tape to ensure the progress of.
This tape instead of a full Middle elevation, close to the size of the bottle, of course. put water into the box in the store car wiper pump hose, and put that bottle when the bottle water if motor pompalanabilsin.
I want to share with you the details of this mechanism in the future than in the pictures and I couldn’t find my archive at the moment.
Circuit PIC16F877 microcontroller based on the software used for the display 2×16 LCD display isis proteus simulation Picbasic source code prepared by the PCB drawings there.
Source: PIC16F877 WITH BOTTLE FILLING SYSTEM all files: Pic16f877 With Bottle Filling System.RAR
- What is the main controller used in this project?
The project uses a PIC16F877 microcontroller. - How does the system know when to start filling?
A sensor detects when the motor stops the bottle, signaling it is ready to be filled. - What displays the current status of the machine?
A 2x16 LCD display shows messages like GETTING A NEW BOTTLE or FILLING. - What type of pump is used for water transfer?
A car wiper pump is used to push water into the bottle through a hose. - How are the bottles moved along the system?
Bottles are moved by a conveyor belt made of plastic coated fabrics like canvas or banner cloth. - What software was used to prepare the source code?
Picbasic Pro was used to prepare the source code. - Can the system be simulated before building?
Yes, Isis Proteus simulation was used for the circuit design. - What happens after the bottle is filled?
The system waits for 2 seconds and then starts the cycle over for a new bottle.
