News & Updates

OXFORD PV PEROVSKITE SOLAR CELL ACHIEVES 28% EFFICIENCY

Oxford PV’s 1 cm2 perovskite-silicon tandem solar cell has achieved a 28% conversion efficiency, certified by the National Renewable Energy Laboratory. The achievement edges out Oxford PV’s own previous certified record of 27.3% efficiency for its perovskite-silicon solar cell, announced earlier this year. Dr Chris Case, Chief Technology Officer at Oxford PV commented, Today’s record demonstrates the unprecedented […]

OXFORD PV PEROVSKITE SOLAR CELL ACHIEVES 28% EFFICIENCY Read More »

Sensor board for micro:bit

The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Features 3V and GND connections can be made from either side and allow you to power a second board such as the MonkMakes Relay Board or MonkMakes Speaker. LED ‘power on’ indicator Reverse polarity protection All three sensors are analog and can be

Sensor board for micro:bit Read More »

STPW12 – PROGRAMMABLE ELECTRONIC POWER BREAKER FOR 12V BUS

The STPW12 is an integrated electronic power breaker, optimized to monitor the input power. Connected in series to the power rail, it is able to disconnect the electronic circuitry on its output if the power consumption overcomes the programmed limit. When this happens, the device automatically opens the integrated power switch and disconnects the load. The intervention

STPW12 – PROGRAMMABLE ELECTRONIC POWER BREAKER FOR 12V BUS Read More »

ESP8266 based e-paper WiFi weather station

I’m a fan of all kind of weather stations. When Daniel Eichhorn twittered about his new version using an E-Paper display module, I immediately preordered one. I decided to build a station with a custom enclosure, so here is my version of a 3D printed version, featuring magnets so it can be attached to the fridge: Using e-paper

ESP8266 based e-paper WiFi weather station Read More »

3A ULTRA-SMALL AND ULTRA-LOW NOISE STEP DOWN POWER MODULE

The MPM3833C from Monolithic Power Systems, Inc is a step-down module converter with built-in power MOSFETs and inductor. The MPM3833C achieves 3A of continuous output current from a 2.75V to 6V input voltage with excellent load and line regulation. The MPM3833C works in forced continuous conduction mode (CCM) and has a voltage ripple under 10mV with one output

3A ULTRA-SMALL AND ULTRA-LOW NOISE STEP DOWN POWER MODULE Read More »

NEED WIFI 5 AND BLUETOOTH 5? THEN TRY OUT UNISOC UWP5661

WiFi 5 also known as 802.11ac has been around for a while now, but few boards have adopted it. The WiFi 5 might easily be confused with the general WiFi (802.11 b/g/n). The WiFi standard 802.11ac is capable of 1300 megabits per second (Mbps) which is the equivalent of 162.5 megabytes per second (MBps), this is 3x faster than

NEED WIFI 5 AND BLUETOOTH 5? THEN TRY OUT UNISOC UWP5661 Read More »

NVIDIA UNVEILS THE NEW AI BRAIN FOR MACHINES AND A CHEAPER JETSON TX2

Nvidia, is one of those companies that never ceases to amaze me. I have to say that they have technically monopolized the GPU ecosystem and now Nvidia is gaining (if not already) for a new crown – AI on the Edge. AI in the cloud has been the buzz ever since, enabling numerous application to be

NVIDIA UNVEILS THE NEW AI BRAIN FOR MACHINES AND A CHEAPER JETSON TX2 Read More »

QUALCOMM LAUNCHES 10NM, OCTA-CORE QCS605 IOT SOC

Qualcomm announced back in April its QCS605 SoC, calling it “the first 10nm FinFET fabricated SoC, built for the Internet of Things.” The octa-core Arm SoC is available in an Intrinsyc Open-Q 605 SBC with the full development kit, including a 12V power supply which is available for pre-order at $429. The product will ship in early December. The

QUALCOMM LAUNCHES 10NM, OCTA-CORE QCS605 IOT SOC Read More »

VCSELS INTEGRATE MICRO LENS ARRAY FOR 3D SENSING

Osram Opto Semiconductors has unveiled the PLPVCQ 850 and the PLPVCQ 940, the latest additions to its Bidos product family. Applications for the new Vertical Cavity Surface Emitting Lasers (VCSELs) include machine vision or facial recognition, as well as object or architectural scanning that involves mapping an area in 3D and positioning virtual furniture and

VCSELS INTEGRATE MICRO LENS ARRAY FOR 3D SENSING Read More »

GYRFALCON LAUNCHES SECOND-GEN AI ACCELERATOR CHIP

Lightspeeur 2803 – a follow on to the Lightspeeur 2801S ASIC – enables upgrading of existing data center hardware to speed AI processing while providing 10X reduction in energy consumption. Gyrfalcon Technology Inc. (GTI), the world’s leading developer of low-cost, low-power, high-performance Artificial Intelligence (AI) processors, today announced the availability of its second-generation chip, the Lightspeeur 2803 AI Accelerator.

GYRFALCON LAUNCHES SECOND-GEN AI ACCELERATOR CHIP Read More »

	GPS Projects
	Internet and LAN Projects
	Interfacing(USB) Projects
	Metering & Instrument Projects
	Sensor – Detector Projects
	Motor Based Projects
	Phone Based Projects
	Robotics and Automation Projects
	Camera – Imaging and Video Projects
	Game and Entertainment Projects
	Home Automation Based Projects
	Memory and Storage Projects
	RFID Based Projects
	Security and Safety Projects
	Sound and Audio Projects
	Temperature Measurement Based Projects
	DIY Projects
	Medical and Health based Projects
	Battery Based Projects
	PWM (Pulse-width modulation) Projects
	Radio Based Projects
	Others Project
	Calculator Based Projects
	Car - Auto Projects
	LCD Based Projects
	LED Based Projects
	Clock and Timer Projects
	CNC-Machines Projects
	Development Board Projects
	RTOS Projects