FORLINX NXP LS1043A & LS1046A NETWORKING SBC’S SUPPORT 10GBPS ETHERNET

NXP LS1043A quad-core Cortex-A53 communication processor was introduced in 2014, while NXP LS1046A quad-core Cortex-A72 SoC was launched about 18 months later. Both are designed for networking equipment such as CPE (Customer Premise Equipment), routers, NAS, gateways, as well as single board computers and include one or two 10 GbE interfaces.

FORLINX NXP LS1043A & LS1046A NETWORKING SBC’S SUPPORT 10GBPS ETHERNET

Forlinx Embedded has decided to leverage those two processors in their OK1043A-C and OK1046A industrial-grade single board computers designed for networking applications.

Both boards are comprised of the same baseboard and only differ by their COM-Express Mini Type 10 module which comes with the processor, memory, and flash storage.

Specifications:

  • COM Express Mini System-on-Module (one or the other)
    • FET1046A-C NXP LS1046A SoM
      • CPU – NXP LS1046A quad-core  Cortex-A72 processor @ up to  1.8GHz
      • System Memory –  2GB DDR4 RAM
      • Storage –  8GB eMMC flash + 16MB QSPI NOR Flash
      • Voltage Input – 12V
      • Temperature Range – -40℃ to +75℃     
      • Dimensions – 84 x 55mm
    • FET1043A-C LS1043A SoM
      • CPU – NXP LS1043A quad-core Cortex-A53 @ up to 1 .6GHz
      • System Memory – 2GB DDR4
      • Storage –  8GB eMMC flash + 16MB QSPI NOR Flash
      • Voltage Input – 12V
      • Temperature Range – -40℃ to +80℃     
      • Dimensions – 84x 55mm
  • Carrier Board
    • Storage
      • SD card socket multiplexed with eMMC, bootable
      • 1x mSATA 3.0 up to 6Gbps
    • Networking
      • Up to 6x 6 Gigabit Ethernet ports (4x from QSGMII and 2x from RGMII)
      • 1x 10Gbps Ethernet port (RJ45)
      • LS1046A only – 1x 10 Gbps Ethernet Port (SFP+) for optical module or SFP-GE transceiver
    • USB – 2x USB 3.0 ports
    • Expansion
      • 1x Mini PCIe 2.0 up to 5GT/s with USB and SIM card signals for 4G module; SIM card slot
      • 2x  PCIe 2.0 up to 5GT/s
      • 3x UART TLL headers
    • Debugging – 1x RS232 debug port, JTAG header with support for NXP CodeWarrior TAP
    • Misc – RTC with on-board CR2032 cell, fan headers, configuration dip-switch, power switch
    • Power Supply – 12V via power barrel jack
    • Dimensions – TBD

Read more: FORLINX NXP LS1043A & LS1046A NETWORKING SBC’S SUPPORT 10GBPS ETHERNET


About The Author

Muhammad Bilal

I am a highly skilled and motivated individual with a Master's degree in Computer Science. I have extensive experience in technical writing and a deep understanding of SEO practices.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.