Search Results for: Temperature Controlled Fan using 8051 Microcontroller …

Temperature Controlled Fan Report - SlideShare - Temperature controlled fan regulator - electronic circuits, 33 thoughts on “ temperature controlled fan regulator ” siddhu march 12, 2015 at 7:00 am. i didn’t find 100k ptc,5k ptc where are they available and does the. Android controlled robot 8051 microcontroller, Android controlled robot using 8051 and bluetoothour robot expert gaurav khadasane has come up ...

Read more

Microcontroller controlled Home Entertainment System

This Instructable will take you on my journey to replace my old Netflix/Vudu Bluray player with a PC based entertainment station for my LCD projector. I wanted to be able to access and control Netflix, Hulu, Youtube, Crackle, NBC, ABC, and the Weather Channel using only a simple remote control. Along the way, I'll give you the full details you need to replicate this project, but at the same time I'm going t ...

Read more

Small 3-wheel ROBOT with PIC16F84 brain & InfraRed eyes.

General description erberes is a small three wheel robot that avoids obstacles which it senses with its active infrared sensors. Each rear wheel has its own motor, the single front wheel is not powered. The robot steers "like a tank" by rotating the rear wheels in opposite direction. The sensors are built with infrared LEDs which are running at 36kHz and two 36 kHz remote control receiver modules. When the ...

Read more

Computer controlled infrared transmitter based on PIC

description This is a programmable infrared (remote control) transmitter, which can be controlled from a computer serial port. It is capable of sending many remote control formats, including the Philips RC-5 standard. Exact formats with the timing parameter names are shown on the pictures: operation The controller will accept commands on a serial port. Settings are: 19200 bps, 8 bits, no parity, 1 stopbit, ...

Read more

Microcontroller Controlled Metal Detector Projects

Result of displays in the form of two scales, which are estimated to judge the material goal.In addition, the screen is small scale level of response and the current supply voltage. PIC18F252 The program is intended for controller PIC18F252.The controller PIC16F873 (A) to this version can not be used. This is more demanding to resources controller. 252nd compatible controller on “pins” with 873 – m and can ...

Read more

Remote controlled LED lighting effects

LED’s have become most important component in lighting industry due to its miniature size and less power consumption. Also LED lights are lot more attractive than the primitive lights used once. This project focused on building an remote controlled LED with multiple lighting effects. Imagine setting the mood of your room using remote, will be cool isn’t it. DESIGN OF RECEIVER AND CONTROLLER: The receiver an ...

Read more

MIDI-Controlled Analog Music Synthesizer

For my electrical engineering senior design project, I decided on designing a analog music synthesizer with MIDI control. I have to admit, this was what I wanted to do since high school and was my ultimate goal as a musician, artist, DIY person, and engineer. This project, in the end, will combine all of my knowledge into one nice little package that I get to show off to friends, family, and faculty and is ...

Read more

Cheap and Easy Dial Controlled High Power RGB LED(s) Driver

There may be a lot of RGB LED Drivers out there, but this one is a bit different, its versatile, small, cheap, and is simple to control. A potentiometer with built in switch is used for the controls. A quick press, switches between color cycling and solid color select modes. Pressing in on the dial and holding, toggles an Intensity control, to brighten or dim the LED. Pressing in and holding again, exits In ...

Read more

Computer Controlled Star

In this instructable I am going to show you how to build a Star with 64 LEDs. The Star operates by itself but the operation mode can be changed when connecting it to a computer via a serial (RS232) interface. After reconfiguring the Star via the computer, the Star will use the new operating mode as the new default. The Star can of course be used during the Christmas period but it can also be used as a night ...

Read more

Arduino controlled light dimmer

WARNING: Some people try to build this with an optocoupler with zerocrossing coz 'that is better' right? Some are even told in electronics shops it is better to use such an optocoupler. WRONG. This will only work with a random fire optocoupler: NOT igniting at zerocrossing is the principle of this dimmer. Switching an AC load with an Arduino is rather simpel: either a mechanical relay or a solid state relay ...

Read more
Scroll to top