One Channel Infra-Red Remote and receiver with onboard Relay provides normally open and normally closed output. The project based on PIC12F683 Microcontroller from Microchip , TSOP1738 used as Infra-Red receiver. Micro-controller decodes the RC5 serial data coming from TSOP1738 and provides high output if the data is valid. The output can be set Momentary or […]
One Channel InfraRed Remote Controller Read More »
Description The Tiny Remoteis a very compact infrared remote control with only two buttons to control an iRobot Roomba. It produces three different infrared control signals that the robot interprets as Clean, Spot and Virtual Wall/Lighthouse. The circuit is built mostly using SMD components to reduce its size, nearly to the size of a keychain
Tiny Remote for iRobot Roomba using PIC12F629 Read More »
This design controls up to 8 devices using a PIC microcontroller (PIC16F84A) connected to the phone line. The unique feature here is that unlike other telephone line based remote control, this device does not need the call to be answered at the remote end so the call will not be charged. This device depends on
Telephone operated remote control using PIC16F84A microcontroller Read More »
Introduction This little project will demonstrate how you can use your old NEC IR protocol based TV,DVD or VCR remote control to control you home appliances like fan bulb or virtually anything. Consumer IR protocols There are a number of consumer Infrared protocols out there and they have been used for every single purpose possible i guess, like
IR(infrared) Remote Control Relay Board with PIC 12F675 Microcontroller Read More »
O circuito não necessita de muitos componentes…basta um microcontrolador, um receptor de infravermelhos e alguns leds para indicarem o nível de dados recebidos pelo comando. Funciona com qualquer comando desde que seja infra-vermelhos. O microcontrolador que usei foi o 12F683 da Microchip em formato SOIC. Apenas precisa de 2 pilhas AAA e consome apenas 0.8mhA
This IR remote control that you can use to control other devices or circuits up to 8 devices. The control codes are sent in RC5 format modulated to about 38 kHz carrier frequency.The IR transmitter powered by the CR2016 which is a 3V button Cells Battery CR2016.To extend the life of the battery this is
8 Channel IR Remote Control Read More »
Philips invented the RC5 protocol for controlling electronic equipment such as CD players, VCR’s and audio amplifiers way back in the 1980’s. The RC5 standard has been adopted and used with great success ever since, which means it is probably the most common IR remote control format in your home today. We have recently been
Infra red remote control tester for Philips RC5 protocol Read More »
LED’s have become most important component in lighting industry due to its miniature size and less power consumption. Also LED lights are lot more attractive than the primitive lights used once. This project focused on building an remote controlled LED with multiple lighting effects. Imagine setting the mood of your room using remote, will be
Remote controlled LED lighting effects Read More »
By embedding a PIC microcontroller into an NES controller, it can be converted into a replacement for Apple’s iPod remote. (Only 3rd and 4th Generation iPods have this, it is a the small oval port next to the headphone jack). Update (8/26/2011): It’s been quite some time since iPods have used this iPod remote connector,
NES Controller iPod Remote Read More »
That moment you take your eyes off the TV remote for just a second, because of which it falls into the hands of your annoying sibling. Yes, fighting for control over the TV is a daily struggle for many. But the TV Remote Jammer shown in this Instructable, will make everyone else stop dead in
Tic-Tac TV Remote Jammer Read More »
