About: Ibrar Ayyub

1.2V to 35V Adjustable DC-DC Converter project has been design around TI’s  LM2576-ADJ IC. Inputs supply 40 VDC.  LM2576-ADJ is a monolithic integrated circuit that provides all the active functions for step down switching regulator, capable of driving 3A load with excellent line and load regulation.this board has minimum number of components. Features  Output 1.2 […]

Symtavision, the timing analysis specialist for verifying embedded systems, has developed an integrated, model- and trace-based methodology for Renesas RH850 multi-core MCUs. The Symtavision/Renesas approach uses Symtavision’s SymTA/S tool suite for model-based timing analysis, optimisation and synthesis, and Symtavision’s powerful TraceAnalyzer for visualising and analysing timing from measurements and simulations. Both SymTA/S and TraceAnalyzer are […]

ARM has added to its CoreLink Cache Coherent Network (CCN) SoC interconnects, which deliver a flexible architecture from sensors to servers. The CoreLink CCN-502 and CoreLink CCN-512 interconnects extend the current family for data center and infrastructure equipment that scales from the edge of the network to the core. “Our new interconnects build on a […]

(PIC18F4550 Programming) Hardware | Schematic | Complete Description This JDM programmer works with a RS232, 9-pin(9 wire) DB9 Serial connector on your computer, and is used for loading Source Code (hex files) into your microcontroller. JDM programmers are Cheap and very easy to make. JDM programmer that we are going to make will be used […]

FT900 is 32bit RISC MCU developed for high speed, interface bridging tasks. FT900 provides a large amount of connectivity options. To name only a few, FT900 can: ● process data from parallel camera input and send them via Ethernet ● transform data from camera to create bitmap compatible with FT8xx (EVE) and send it through […]

Spansion is sampling 96 new variants of its ARM-based microcontrollers. Volume production is planned for Q1 2015. Based on the ARM Cortex-M4F core, the MCUs have a 200 MHz operating frequency and support a diverse set of on-chip peripherals for enhanced human machine interfaces (HMIs) and machine-to-machine (M2M) communications. Applications include factory automation, industrial IoT, […]

PIC18F4550 USB DEMO INTERFACE BOARD PROJECT This project / USB hardware is quiet easy to make at home with few components, this piece of hardware will be detected by your computer like any other external device once it’s completed. This is a Simple USB demo interface development board project and demonstrate excellent USB interface to […]

All of us desire to have quality things for us art is almost a necessity. Quality multimeter saves time for those we are used to from the brand FLUKE. All of us have experienced in your life situation where a quality product saved us a lot of time and energy. Whether it was an ordinary […]

Power – The Gertbot brings electric power to your computers. It has four channels each capable of driving 30 Volts and 2.5A. It can drive capacitive or inductive loads. Besides the four H-bridges the boards also has two open drain N-MOSFETS which can sink 3A at 30Volt. Usages – The primary target is driving motors. […]

Description Schaer is a generic programmer circuit capable of uploading and downloading firmware to/from several electronic devices like microcontrollers and eeproms. This and other programmers came to my attention when I was working in CAMBADA, the robotic soccer team from the University of Aveiro, and since all other programmers available there were too expensive for me to buy […]