Introduction For our final project we made a digital vocoder, which could be accomplished over this semester’s remote desktop environment. A vocoder is a synthesizer that generates sounds which are modulated by an input signal. It was originally designed to reduce the bandwidth of voice signals over the telephone, but was never introduced practically. It […]
ECE 4760: Final Project Report Read More »
Introduction For our final project, we created a spy robot: a robot that uses remote radar sensing to detect intruders. The physical system consisted of the servo setup we had from lab 4, a time-of-flight distance sensor (discussed in depth below), and the PIC32 microcontroller. The distance sensor was affixed to the servo setup and
4760 Final Project: Spy Robot Read More »
For our project, we designed and built a remote control tank, which uses a modified motorized nerf gun as its firing mechanism, an ultrasonic sensor in order to sense objects in its surroundings, and a bluetooth module which allows the user to control the tanks movement and firing mechanism with either our cell phone or
ECE 4760 FINAL PROJECT: REMOTE CONTROL TANK Read More »
Most high-end modern vehicles come with keyless car Alarm or PKE:as the name says in the key less car you do not have to use any key to unlock/lock the doors neither start the car engine. to unlock or lock the doors the driver just presses on the small black button mounted at the door
Building Keyless Car Alarm Read More »
(You can skip the paragraph)My sister has a Nikon D60 camera and is an active photographer. She had been begging for a remote control for the camera and this particular model doesn’t have the option of wired remote, which would have been easier to make myself. The original ML-L3 remote costs something around 40$ in
LEGO Nikon IR Remote Read More »
At home I have a few electrical Rolling Shutters that are controlling via a switch with which you can let them go up or down. When the Rolling Shutter reaches the end of its up or down movement, the motor of the Rolling Shutter stops automatically and you can put the switch that controls it
Remote Controlled Rolling Shutter Read More »
This project is a variation on the Remote Control Rolling Shutter project that I posted earlier, see: https://www.instructables.com/id/Remote-Controlled… The biggest difference is that I did not only prototype this project but I actually build it to be used in my home. At home I have an electric fire place which has a heater on board.
Infra-Red Panel Remote Control Read More »
In this project, we are going to use a PIC microcontroller to remotely control few AC loads by just using an IR remote. Here we designed it on PCB using EasyEDA’s online PCB designer and used their PCB designing services to order the PCB boards as shown in the subsequent section of the article. At the end
IR Remote Controlled Home Automation Using PIC Microcontroller Read More »
This project is a spin-off of another project I am working on and since there is a Remote Control 2017 contest on Instructables I thought I post this project. So if you like this project, please vote for it. Thanks. As you may know, I am a big fan of the Microchip 8-bit PIC controllers,
USB NEC Infra-Red Transmitter and Receiver Read More »
Since 2008, PIC Microcontroller has provided students, hobbyists, and engineers with quality PIC projects, tutorials, PDFs, software, tools, and embedded systems resources.
© 2008 – 2026 PIC Microcontroller. All Rights Reserved.
