Power and Dependent Sources




Determine the power absorbed by the VCVS in the figure. Solution: The VCVS consists of an open circuit and a controlled-voltage source. There is no current in the open circuit,

Power and Dependent Sources

so no power is absorbed by the open circuit. The voltage vc across the open circuit is the controlling signal of the VCVS. The voltage Vc (across 2 ohm resisitor) measures vc to be vc = 2V. The voltage of the controlled voltage source is vd = 2 vc = 4V. The current in the controlled voltage source is 6V/4 ohm= 1.5A. The element current id and voltage vd adhere to the passive convention. Therefore, p = id*vd = (1.5)(4) = 6W is the power absorbed by the VCVS.

For more detail: Power and Dependent Sources




READ  With HAMMOND 1553W enclosures the rain won´t surprise you

Leave a Comment

*
= 5 + 6

Read previous post:
NITROGEN8M MINI IS THE FIRST SBC WITH I.MX8M MINI SOC
NITROGEN8M MINI IS THE FIRST SBC WITH I.MX8M MINI SOC

Boundary Devices has unveiled its “Nitrogen8M-Mini” SBC, the first SBC that is based on NXP’s new i.MX8M Mini SoC, and also the...

Close
Scroll to top