I²CDRIVER – AN EASY-TO-USE TOOL FOR CONTROLLING I²C DEVICES




I²CDriver is an easy-to-use, open source tool for controlling I²C devices. It works with Windows, Mac, and Linux, and has a built-in color screen that shows a live “dashboard” of all the I²C activity. It uses a standard FTDI USB serial chip to talk to the PC, so no special drivers need to be installed. The board includes a separate 3.3 V supply with voltage and current monitoring.

I²C is Everywhere

It’s in every phone, in your embedded electronics, in every microcontroller, Raspberry Pi, and PC motherboard. It’s a mature technology – still going strong after 36 years. Because it’s everywhere, I²C is used by everyone from novices to embedded designers. But the common element of everyone’s I²C experience struggle. Instead of being easy, I²C very often feels really difficult. Because there are so many ways for I²C to go wrong, things rarely “just work” and instead involve some painful debugging.

I²CDriver Makes I²C Much More Friendly

I²CDRIVER – AN EASY-TO-USE TOOL FOR CONTROLLING I²C DEVICES

While other I²C tools might offer a couple of LEDs, I²CDriver has a clear logic-analyzer display of the signal lines plus a graphical decoding of the I²C traffic.

In addition, it continuously displays an address map of all attached I²C devices, so as you connect a device, it lights up on the map. You’ll never have to ask “is this thing even switched on?” again.

The current and voltage monitoring let you catch electrical problems early. The included color-coded wires make hookup a cinch; no pinout diagram is required. It includes a separate 3.3 V supply for your devices, a high-side current meter, and programmable pull-up resistors for both I²C lines.

READ  Complete Circuit Board Lab & POV Business Card using PIC12F508 microcontroller

There are three I²C ports, so you can hook up multiple devices without any fuss.

Read More: I²CDRIVER – AN EASY-TO-USE TOOL FOR CONTROLLING I²C DEVICES

 




Leave a Comment

*
= 4 + 6

Read previous post:
PIN DIAGRAM
INTERFACING ADC 0804 with 8051 MICROCONTROLLER

INTERFACING ADC USING 8051 MICROCONTROLLER: In this article you will learn how to interface, analog to digital converter with 8051 microcontroller. Unlike, pic microcontroller, Arduino and avr microcontroller,...

Close
Scroll to top