LT8335 – Low IQ Boost/SEPIC/ Inverting Converter with 2A, 28V Switch




Features

  • 3V to 25V Input Voltage Range
  • Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 6μA
  • 2A, 28V Power Switch
  • Positive or Negative Output Voltage Programming with a Single Feedback Pin
  • Fixed 2MHz Switching Frequency
  • Programmable Undervoltage Lockout (UVLO)
  • Internal Compensation and Soft-Start
  • Low Profile (0.75mm) 8-Lead (3mm × 2mm) DFN Package

Low IQ Boost

Description

The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very low output currents while keeping the output ripple below 15mV in a typical application. The internally compensated current mode architecture results in stable operation over a wide range of input and output voltages. Integrated soft-start and frequency foldback functions are included to control inductor current during start-up. The 2MHz operation combined with the small 8-lead DFN package, enables low cost, area efficient solutions.

Applications

  • Industrial and Automotive
  • Telecom
  • Medical Diagnostic Equipment
  • Portable Electronics

For More Details: LT8335 – Low IQ Boost/SEPIC/ Inverting Converter with 2A, 28V Switch




Leave a Comment

*
= 5 + 6

Read previous post:
Soundtrack
Soundtrack using PIC16F688 Microcontroller

This project uses a microcontroller to drive a speaker and play one of two songs: Yakety Sax (the chase song...

Close
Scroll to top