About: Ibrar Ayyub

MUNICH, Germany – June 20, 2016 – Imec, the world-leading nano-electronics research center and partner in Energyville, will present at this week’s Intersolar Europe/EU PVSEC a highly efficient bifacial n-PERT (BiPERT) solar cell featuring a bifaciality value close to 100%. With a rear cell efficiency close to the efficiency measured from the front of the […]

About a year ago I started on a project to make a temperature controlled nightlight. I was inspired by seeing these lovely LED lamps styled as mushrooms growing out of pieces of wood. Those mushrooms were made out of glass, which was somewhat beyond my skills. However I then saw some had used translucent sculpey […]

SAN DIEGO–(BUSINESS WIRE)–Peregrine Semiconductor Corporation (NASDAQ: PSMI), a fabless provider of high-performance radio frequency integrated circuits (RFICs), today announced a single-pole, single throw (SPST) antenna tuning switch for LTE-Advanced (LTE-A) smartphones. This latest addition to Peregrine’s series of tuning devices leverages Peregrine’s UltraCMOS® process using the HaRP™ and DuNE™ enhancements to deliver an ideal combination […]

Features 3V to 25V Input Voltage Range Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 6μA 2A, 28V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Fixed 2MHz Switching Frequency Programmable Undervoltage Lockout (UVLO) Internal Compensation and Soft-Start Low Profile (0.75mm) 8-Lead (3mm × 2mm) DFN Package Description The LT®8335 […]

This project uses a microcontroller to drive a speaker and play one of two songs: Yakety Sax (the chase song from the Benny Hill Show) and Entrance of the Gladiators (the clown juggling unicycle song). The tunes are stored as a series of distinct notes.  The frequency and duration of each a note is sent […]

This circuit is a small  “on-board” temperature recorder for RC models. For those who practice this hobby know that the engine temperature is very important, not only for performance but also to ensure the smooth operation and durability of the engine. It records the motor temperature of my helicopter in flight 2 times per second and […]

About this project Puck.js is a low energy smart device which can be programmed wirelessly and comes pre-installed with JavaScript. It is both multi-functional and easy to use, with a custom circuit board, the latest Nordic chip, Bluetooth Smart, Infra-red and much more, all enclosed in a tiny silicone case. We have an easy to […]

General Description The MICRF213 is a general purpose, 3.3V QwikRadio® Receiver that operates at 315MHz with typical sensitivity of -110dBm. The MICRF213 functions as a super-heterodyne receiver for OOK and ASK modulation up to 7.2kbps. The down-conversion mixer also provides image rejection. All post-detection data filtering is provided on the MICRF213. Any one of four […]

OK, further to Part 1 of this blog where we created a schematic, now it’s time to move to the PCB. If you still don’t have your license, get a trail from here: Professional PCB design tool | CircuitStudio   And some more information from here: https://www.element14.com/community/docs/DOC-73745?ICID=designctr-devtools-info   Open up the project (well, if it’s […]

Digital thermometer with auto saving log file in excel by Pic microcontroller is vary advance, useful and realistic project. The implementation filed of this project is wide. Now a day’s atmospheric prediction saves lots of life. And for getting wright prediction we have to analysis lots of recorded data. By using this project it can […]